Categories Interesting

How Much Moonshine Dows An 8 Gallon Still Make? (Correct answer)

A 8 gallon run will yield 1.5-3 gallons of alcohol. A 10 gallon run will yield 2-4 gallons of alcohol.

How much moonshine can a 5 gallon still make?

  • For example, the average run in a 5 gallon still can be expected to produce about a gallon or a gallon and a half of moonshine. Of course, the quality of the different batches of moonshine will vary depending on many factors – you may only get ¾ of a gallon in one batch, but with a very high proof and excellent quality.

Contents

What size still do I need for 5 gallons of mash?

This means that for a 5 gallon mash you will use 1-1/4 gallons of backset and 3-3/4 gallons of water. Since you will be running your still for hours, you do not want to leave the fermenter empty.

How much mash do I need for a 13 gallon still?

So this is what you want to collect—and then discard. You’ll collect the foreshots until your vapor temperature reaches about 175°F (80°C), and Rick recommends collecting at least 4 ounces per 5 gallons that you’re distilling. This would be at least 5.2 ounces for a 6.5 gallon batch, or 10.4 ounces for a 13 gallon run.

What size moonshine still do I need?

Stills come in a wide variety of sizes. However, most craft stills will be between 3 gallons and 8 gallons. Have a think about how much moonshine you really need. In most cases, a 3 gallon still is all that a hobbyist needs.

How many shots are in a gallon of moonshine?

These days most bottles are 750 ml, which is close to 1/5 of a gallon. A gallon contains 128 fluid ounces. So a fifth (1/5) or 750ml contains a tad more than 25 oz, or 25 one-ounce shots. Of course, many use 1 ½ ounce for a standard shot which is around 16 shots.

What kind of water do you use to cut moonshine?

One of the most important tips I can give to moonshiners is to always use distilled water for making moonshine wash. It’s no secret that tap water contains a plethora of chemicals, some of which includes chlorine, chlorate, bromate and fluoride.

How can you tell if moonshine is safe to drink?

How to Test for Purity. Folklore tells us one way to test the purity of moonshine is to pour some in a metal spoon and set it on fire. 6 If it burns with a blue flame it is safe, but if it burns with a yellow or red flame, it contains lead, prompting the old saying, “Lead burns red and makes you dead.”

How much is a gallon of moonshine worth?

It costs around $8 per gallon for the sugar and wheat to make the moonshine. The selling price is around $25 a gallon if sold in bulk, or $40 for retail price.

Can you put too much sugar in moonshine mash?

The reason why you use sugar in a mash is basically because your yeast consumes the sugar, converting it into alcohol. However, too much sugar in your mash can actually hinder your yeast’s ability to make alcohol, and most people want to get as high an alcohol content as possible when making moonshine.

How much sugar does it take to make a gallon of moonshine?

Step 3: The Recipe For example, for every 1 gallon of water, you would use 1 pound of sugar, and 1 pound of corn meal. So for a 5 gallon mash (which is recommended for your first batches of moonshine) you would use 5 gallons of water, 5 pounds of corn meal, and 5 pounds of sugar.

Do you have to use copper for a moonshine still?

As I mentioned above, copper is a vital component when you’re distilling spirits. However, your entire still doesn’t have to be made out of copper in order to get the sulfur-eliminating benefits. You can go with a stainless steel still and also use copper in your column packing.

What does a thumper do in a still?

The thump keg is one of the most clever and iconic design elements of the traditional hillbilly still whose purpose, briefly stated, is to distill the output of the pot still a second time, without actually having to run the distillate through the still twice.

How long does it take to make moonshine?

As you can see, the process of fermenting and distilling moonshine is quite time-consuming. In general, you can expect it to take between 1-3 weeks to make moonshine, as the mash must ferment and the distillation process must be continued until the final shine is safe for consumption.

How much is a fifth of whiskey?

A fifth is a unit of volume formerly used for wine and distilled beverages in the United States, equal to one fifth of a US liquid gallon, or 253⁄5 U.S. fluid ounces (757 milliliters); it has been superseded by the metric bottle size of 750 ml, sometimes called a metric fifth, which is the standard capacity of wine

How much is a fifth of liquor?

A fifth of alcohol, be it a fifth of vodka or any other type of liquor, is another name for a 750 ml alcohol bottle. In the late 19th century, one fifth of a gallon was the legal threshold for individual commercial alcohol sales.

How Much Alcohol Will My Whiskey Still Make?

Despite the fact that every copper moonshine still is unique, many distillers begin by asking themselves a fundamental question such as “how much moonshine will my still produce?” or “how much whiskey will I be able to extract from my 5 gallon whiskey still?” However, while there is no definitive answer – you will need to experiment with your particular whiskey still to determine how it operates most efficiently – we can provide you with some general guidelines so that you can adjust your methods if you are not producing moonshine as efficiently as you would like.

The alcohol proof of your finished product will be determined by a number of factors, including the strength of the chemicals in your mash, the chemistry of how those ingredients interact, and the efficiency with which your distillation process is completed.

Consider how each of the items on this list will assist you in making the most of your alcoholic beverage run.

Yeast and Sugar

Despite the fact that each copper moonshine still is unique, many distillers begin by asking themselves a fundamental question such as “how much moonshine will my still produce?”. in the form of “how much whiskey will I be able to extract from my 5 gallon whiskey still?” However, while there is no definitive answer – you will need to experiment with your particular whiskey still to determine how it operates most efficiently – we can provide you with some general guidelines so that you can adjust your methods if you are not producing moonshine as efficiently as you should be.

There are a multitude of elements that influence the alcohol proof of your finished product: the strength of the components in your mash, the chemistry of how those chemicals interact, and the efficiency of your distillation process, among others.

Consider how each of the items on this list will assist you in making the most of each alcohol-related excursion.

Using a Copper Still

When it comes to distilling alcohol, temperature control is critical, and copper stills provide the finest temperature control for moonshiners. It is critical to time your run at this temperature, because ethanol alcohol vaporizes at a much lower temperature than water and in a relatively narrow temperature range (usually 174-195 degrees Fahrenheit). Cupro is one of the most trusted materials for kitchen and distilling equipment because to its uniform heating properties. By utilizing a copper still, it is possible to optimize the amount of time spent at the correct temperature required for distilling the most ethanol.

For example, a typical run in a 5 gallon still may be expected to generate around one gallon or one gallon and a half of moonshine on average.

For example, you may only obtain 34 of a gallon from one batch, but it will have a very high proof and be of exceptional quality. Alternatively, you may prepare a batch that yields more than a gallon, but also contains more ” feints ” that will find their way into subsequent batches.

Standard Yields:

If you’re making alcoholic beverages, temperature control is vitally crucial, and copper stills provide the finest temperature control for moonshiners. It is critical to time your run at this temperature, because ethanol alcohol vaporizes at a much lower temperature than water and in a very narrow range (usually 174-195 degrees Fahrenheit). Cupro is one of the most trusted materials for kitchen and distilling equipment because to its uniform heating properties. By utilizing a copper still, it is possible to optimize the amount of time spent at the correct temperature required for distilling the most ethanol possible.

Even with a 5 gallon still, an average run may be expected to yield around one gallon or one gallon and half of moonshine.

For example, you may only obtain 34 of a gallon from one batch, but it may have a very high proof and be of exceptional flavor.

  • Temperature control is critical while distilling alcohol, and copper stills provide the finest temperature control for moonshiners. It is critical to time your run at this temperature, because ethanol alcohol vaporizes at a much lower temperature than water, and in a relatively narrow range (usually 174-195 degrees Fahrenheit). For this reason, copper is one of the most trusted materials for kitchen and distilling equipment. Using an electric copper still may help you optimize the amount of time you spend at the right temperature for distilling the most ethanol, which can help you make more money. In average, you may expect your alcohol still to generate a final batch that is around 20% the size of the copper still’s pot. For example, a typical run in a 5 gallon still may be expected to yield around one gallon or one gallon and a half of moonshine on average. As a result, quality will vary greatly across batches of moonshine, depending on a variety of conditions. For example, you may only obtain 34 of a gallon in one batch, but it may have a very high proof and be of exceptional quality. Alternatively, you may prepare a batch that yields more than a gallon but has more ” feints ” that will find their way into subsequent batches.

“Barrels” is a painting by William Warby. There are several cues that indicate when a whiskey run should come to a finish, but you may also anticipate when a run should come to an end depending on the approximate amount of moonshine you’ve gathered. You shouldn’t be concerned if you have distilled every last drop because most runs will still leave some wash at the “bottom of the barrel.” In most cases, it’s not worth it to run your copper at temperatures higher than 212 degrees Fahrenheit on your run, so that’s a solid indicator.

There will be a difference in the amount of moonshine produced by each distillation carried out in a copper whiskey still.

If you are not reaching numbers close to these, consider whether changing some of the factors of your distillation process will allow you to extract more product from your copper moonshine still.

Which Moonshine Still Is Right for You

Choosing the Best Moonshine Still is an important decision. However, a significant amount of our clients know what they want to specialize in, but they don’t know what equipment they’ll need to get there. This is especially true for those new to the skill of distillation who want to get their feet wet in the artisan craft and art of distillation. Some only want to use their stills for whiskey and/or brandy, while others only want to use them for very pure neutral spirit, while still others only want to use them for gin.

We’re here to talk about which still is best for your particular specialism, as well as which parts should be used in conjunction with the still to get the most productive outcomes.

Let’s start with our most popular tower, the Dual Purpose alcohol moonshine distiller:

The Dual Purpose is a high-quality piece of equipment in every respect. It is so named because, as the name implies, it serves two functions. It may be used as a pot still for whisky or brandy, as well as a reflux still for high purity spirits such as gin or vodka. Those searching for a little of variation in their goods will be satisfied with this option as well. It has the capability of generating at 180-190 proof or up to 94 percent alcohol concentration. The still will be available in a variety of configurations, including: Eight gallon dual purpose, thirteen gallon dual purpose, eight gallon two-piece dual purpose, and eight gallon dual purpose with a gin basket are also available.

  • The 8 Gallon will contain around 6.5 Gallons of distilling wash, which will yield approximately 1 gallon of distillate, while the 13 Gallon will hold approximately 10 Gallons.
  • An 8 Gallon will produce around a quart of distillate every hour, and you will wind up with approximately a gallon to a gallon and a half of product after the process is over.
  • This is an estimate and is dependent on the amount of alcohol by volume (ABV) present in the wash and the proof you wish to achieve in the process.
  • See the blog post on making cutbacks for more information.
  • If you’re searching for a tower that can handle both neutral spirit production and whiskey/brandy production, but you’d want to focus more on whiskey production, this is an excellent choice.
  • This is very useful when creating neutral spirits, brandies, and whiskies.
  • The copper dual is also equipped with an improved thermometer, which gives it a more high-end appearance overall.
  • The column will be started with a bottom extension that has a reflux jacket incorporated into it.
  • Add your juniper berries if you’re making gin, or something like cinnamon sticks if you’re looking to infuse your spirit with a cinnamon kick.

The gin basket on this still can be removed if you want to use it as a neutral spirit still, and both the basket and the bottom extension may be removed if you want to use it as a pot still.

Pot Still Moonshine Still

Is it not interesting to you to make neutral spirit? The Pot Still, with its reduced column and straightforward construction, is intended for high-flavor, lower-purity spirits. However, if you ever became inquisitive and wanted to experiment with manufacturing a neutral spirit, you may still do so with a pot still by distilling your product a second and/or third time while adding something called Rashig Rings and copper mesh to the inside of the still tower. Because of the copper alembic onion head and copper condenser, the Copper Pot Still is a winner when it comes to making whiskies and brandies.

  • It’s known as the Hybrid 4-in-1 Distiller, and it’s the stuff of moonshiners’ fantasies.
  • Use your boiler to connect the complete tower to the boiler and operate the still as an Essential Oil Distiller, which is capable of vaporizing lavender and other botanicals to make infusions, or run it as a conventional reflux still in the same manner as before.
  • Here’s what distinguishes it from other stills from the film: Mile Hi: It has the capability of being utilized as a filter device.
  • Anyone who wants to get the most out of their skill and maximize their return on investment should consider taking this course, which I still strongly recommend.
You might be interested:  Where To Buy Climax Moonshine In Kentucky? (Correct answer)

Torpedo Moonshine Still

The Torpedo and the Two-Piece Torpedo are similar to a Dual Purpose, which can be used as a pot still or as a reflux but has a larger diameter and length, which means it can cook faster. More output per hour will be produced by the greater diameter, while the taller column will aid in purification. Three-inch towers can yield around 2 quarts of product each hour. It will be available in two sizes: a 13-gallon model and a 26-gallon model for serious distillation. “Cold finger” reflux condensers are used in the Torpedo, and they are cylinder-shaped reflux condensers that are integrated into the tower’s internal structure.

  • The two-piece Torpedo will come in useful if you’re trying to concentrate on whisky more than anything else, as the removable bottom extension will allow for a shorter column and more flavor retention, as well as more convenient storage.
  • Perhaps you have a completely different vision for what you want to include in your still.
  • The 8 Gallon Essential Oil comes with a 4L (1 Gallon) bucket as well as a top with a condenser already attached to the bucket.
  • The 13 Gallon variant will twice the capacity of the bucket (2 gallons in total) and include a stainless thermometer on the top, as well as a 3 inch diameter tower instead of a 2 inch diameter tower on the bottom.
  • Because the Mighty Mini is only available in a 3 Gallon size, you may expect a yield of around one quart.
  • We’ve also recently introduced a new Mighty Mini, which is still referred to as the PRO model.
  • The Outback was originally created for overseas clients in order to save shipping costs and make storage easier.
  • The Outback is a brilliant design that can be collapsed and placed directly into an 8-gallon milk container for easy travel and storage.
  • You’ll also receive an improved thermometer as a standard feature on the still, which will be a stainless steel thermometer rather than the standard brass thermometer.
  • The Traditional Pot Still is a type of still that has been around for a long time.
  • Pure taste testing was used, with no use of high-tech thermometers or boil enhancement rings.

In addition to its comparatively low cost when compared to other stills, it teaches you the importance of using your own instincts when creating a homemade whiskey or brandy from scratch. There’s no relying on a thermometer to perform some of the heavy lifting for you; it’s all up to you.

Thumper Moonshine Still

Another design that may be traced back to the early days of moonshine production is the Thumper moonshine still. In a way, this is still the very beginning of the reflux symptoms. Thumpers are sometimes referred to as “doublers” due to the fact that they use two milk cans rather than one to distill their products. As is customary, one milk can will enough to heat up your laundry as needed. As the hot vapor produced by the still flows through the condenser and into the second milk can, the cold water contained within the second milk can will “condense” the hot vapors.

This results in a double distillation, which saves you time while also providing you with a great treat at the end.

Take a look at all of the many kinds of people:

Flute Moonshine Still

The Mile Hi Flute moonshine still is the final but certainly not the least of these. This is the most adaptable of the stills we have available. This design allows you to alter the height of the tower by adding or removing pieces as needed. You may remove the plates and use it as a stripping still or a pot still, depending for your needs. Increase the number of plates and sections to run as a reflux or fractional still. This still is capable of producing high-percentage neutral spirits such as vodka, as well as flavor spirits such as whiskey and brandy, among other things.

  • Increase the percentage by include a packed column extender.
  • The design and versatility are same; the only variation, and it is a significant difference, is the amount of production per hour.
  • Approximately 2 gallons per hour will be produced by the 6′′ tower at 95 percent proof, and 3 gallons per hour or more at 150-160 proof.
  • The boilers are available in three different sizes: 26 gallon, 53 gallon, and 135 gallon.
  • The 4′′ diameter should be used on the 26 gallon.
  • For those of you who have made up your decision and want to commence cooking right now, here’s a link to our Still Page.

Share This Post With Others!

a link to the page’s load

8-Gallon Liquor Still Kit for Sale

Eight-gallon stainless steel still (dual purpose, 2′′) is available in the distillation equipment section of our website. $ 399.99Availability: In stock (can be backordered) CompleteStill8gallon2inchCategories:Distillation Equipment,Complete DistillersSKU:CompleteStill8gallon2inch Tags:stainless steel,8 gallon,still,8 gallon stainless steel still,stainless steel still,8 gallon stainless steel still,stainless steel still,8,gallon,stainless,steel Reflux Still, vodka still, gin still, moonshine still, and other spirits

Description

This 8-gallon liquor still is ideal for those who are just getting started in the world of distilling their own booze. It has been paired with our 8-gallon stainless steel milk can boiler and 2′′ stainless steel dual purpose still tower to save you money and make a truly outstanding liquor still kit. This 8 gallon still may be used as a standard pot still (by running water through only the condenser and removing the bottom half of the tower) or as a reflux still (by removing the bottom portion of the tower).

The greatest moonshine still for sale has been identified, and you have come to the right place!

How to assemble your liquor still:

More information on constructing your moonshine still may be found in our blog article “assembled your dual purpose moonshine still tower” or in our video “How to Set Up Your Dual Purpose Reflux Still,” which both include comprehensive instructions. As an added bonus, you may watch our video on “how to operate a dual purpose still tower.” This still for moonshine has the following ingredients:

  • More information on constructing your moonshine still may be found in our blog article “assembled your dual purpose moonshine still tower” or in our video “How to Set Up Your Dual Purpose Reflux Still,” which provides step-by-step instructions. Check out our video on “how to use a dual-purpose still tower” for further information. Among the ingredients in this moonshine still are:

10 reviews for8 Gallon Stainless Steel Still (Dual Purpose, 2″)

  1. S.Warren is rated 5 out of 5 stars. The level of customer service is exceptional. Every inquiry and concern was handled as soon as possible and in detail. This item was delivered on time to our home by FedEx and was in perfect condition. This Still performed well after being unpacked, and we immediately set it to work, checking for leaks at all of the welds and seams with a solution of soap-water while the Still was at working temperature. However, this product is exceptional and perfect. There were no leaks discovered anywhere. With their products and service, it is evident that MoonshineDistiller.com is in the business of serving people’s requirements. Based on my personal experience, I would strongly advise you to purchase here rather than wasting your time at other websites that sell comparable items. Kishor has been rated 5 out of 5 stars. Excellent product, made of heavy-duty stainless steel. Product was delivered quickly and without issues. Thanks, Moonshinedistiller
  2. I appreciate your help. Five-star rating for S. Johnson. Can you say the word “joy”? I only received it last week and completed my first run, which reached a maximum proof of 110. Machine with a sweet smell
  3. Vino5/9/15 – Rated 5 out of 5Vino In February, I purchased one of them, as well as a sight glass and a parrot. I have been distilling with a pot still for quite some time. This machine handles everything
  4. The only thing I added was an electric 1500 watt heater, which I purchased separately. I’ve done a lot of testing with this setup, and the results have been amazing. I utilized propane for the first time and did not care for the staining of the tank, so I invested in an internal heating source instead. It is very possible that this machine with the improvements will be all I ever require. The greatest E-85 they’ve ever had is made by me, according to all of my buddies. Mountain Man is rated 5 out of 5 stars. Not the product, but the company MD – KILLER Customer Service is the focus of this review. – I received a prompt response to an email inquiry in the morning — and my item was shipped the same day, three hours after I ordered it… I spoke with another well-known Colorado vendor (the one who is very proud of his welding) and he said it would take days to ship…. I’ll write another review once I’ve finished purifying my first batch of water
  5. Rated 5 out of 5 stars Mt. Everest Man– It’s time to look through the product. The unboxing process went just as planned (lots of the Mountain Man Happy Dance mixed with tears of joy). The process of putting it together was simple. Following the application of the Teflon Tape, no tools were required
  6. All that was required was to hand tighten the thermometer. The clearance at the bottom of the condenser is 7 12″ since I’m a Pot Still sort of person (Mountain Man prefers things old school). A Mason jar or a 1000-mL beaker will fit well in this space. Some Usage Suggestions: The weight of 6 gallons of liquid in the boiler is considerable. Your “special medicine” will be required in greater quantities if you injure your back. 4.5 liters of freshly brewed backset is scorching hot. It’s difficult to explain the use of Eau de Rum Wash on your overalls to an EMT or an ER doctor. Finally, remember Gandalf’s words of wisdom: “Keep it hidden, keep it secure.” And, by all means, enjoy yourself. Chris has been rated 5 out of 5 stars. The customer service provided by this organization has been great from the beginning. I can’t express my gratitude to the proprietor enough. The quality of this product is unrivaled in the industry. There is no need to look any further for a high-quality homestead product
  7. Rated 5 out of 5 stars Matthew Scott (the confirmed proprietor) – This is a fantastic tiny still. The package arrived quickly and was well-protected. The rating is 5.0 out of 5 by Robert Bishop (the verified owner). I purchased mine at the beginning of the year and was finally able to put it to use last month.. It performs admirably. This is an excellent option for individuals who only wish to distill small quantities (5 gallon or less) at a time. The metal is thick, the welds are strong, and it is a well-constructed piece of equipment. Overall, this is an excellent purchase for anybody interested in distilling
  8. Rated 5 out of 5808 total votes HILIFE (owner who has been verified)– This is still a kick in the shins! A 5gallon homemade copper pot that I purchased somewhere else worked out fine for me. What else can I say? I was fast to understand that I would want a more substantial solution and purchased this 8 gallon still, which I really like! This is an excellent place to start for anyone who is new to distillation. Thank you to everyone at Moonshine Distiller
  9. We appreciate your support.

Amazon.com: Slsy 8 Gallon Alcohol Still Water Alcohol Distiller, 30 Liters DIY Whiskey Still Stainless Steel Spirits Boiler with Copper Tube, Home Brew Wine Making Kits with Thumper Keg: Home & Kitchen

On June 29, 2021, a review will be conducted in the United States. Size: 8 GalAcquired with a verified purchase After applying magnets to all of the pots, we discovered that both little pots were magnetic The fermentation vessel was not made of stainless steel; it may have been made of aluminum or nickel. I’m quite concerned with the “misleading” promotion for stainless steel. I was irritated when I saw that I had to pay $31.50 to return the item to the seller. a rating of 0 out of 5 stars I felt compelled to give this a one-star rating in order to submit it.

  1. Size: 8 GalAcquired with a verified purchase So, first and foremost, this.
  2. With a few tweaks, this game can potentially be quite enjoyable.
  3. It was necessary to purchase when my thumper’s lid didn’t really fight well.
  4. No matter what I did, I couldn’t seem to keep my momentum.
  5. And because of the stiffness, it is still a hassle.
  6. You won’t be able to obtain an accurate temperature because the pot is barely 4 inches long, but I have no problems with the pot or the extremely little condenser / worm.
  7. I’m talking about four bags.
You might be interested:  Where Do They Serve Moonshine In Back Woods? (Correct answer)

Because of the way they’ve been put up, they’ve spilled like a sob.

And.

Because of this, water is used.

All of them.

You don’t want it to throw up on you.

A molassas cocktail is made using corn liquor.

I haven’t been this excited in a long time as I was when I first saw it begin to dribble down.

8 Gallon Capacity Purchase that has been verified It was just a few of days ago that I received mine.

It has a fantastic appearance.

When the temperature reached 212°, it began to send water out to me.

On May 31, 2021, a review will be conducted in the United States.

Others have complained of defects, packing issues, and missing pieces, among other things.

This is still a pretty nice deal considering the pricing.

The design of the thumper is right.

It has some instructions, which aren’t horrible in and of themselves, but they aren’t precise enough for the possibilities available.

I set mine up, took it apart, and clean it on a regular basis and have had no problems..

This is an excellent value.

The packaging is excellent.

Published on May 31, 2021 by Austin Brown This is a fantastic solution.

I’ve heard in other evaluations that the designs are poor, or that they’re plain horrible.

Each and every component functions as intended, and the packaging was extremely well-protected against harm.

The only thing missing are instructions on how to put it all together.

Additionally, it does not include the water pump that you will require.

There are only three latches on the thumper, so you have to be cautious to put the silicone ring properly when kissing it into place or you may have a leak that you won’t notice until you are in the middle of the run.

The photographs in this review On December 21, 2020, the United States will conduct a review.

The first attempt was difficult; the machine spat and blew continuously throughout.

I discovered that there is only one extension that fits into the thumper.

However, on the second attempt, there were little steam (vapor) leaks from all over the place.

We are unable to sufficiently tighten the nuts or to sufficiently reinstall the seals.

I didn’t want that to end up on the fireside.

I’m hoping the vendor will sell them separately.

5 Gallon Capacity Purchase that has been verified First and foremost, I observed reviews that complained about troubles with seals/gaskets; however, I believe that part of the problem is a lack of knowledge about how to deal with the specific type of seals used, and so I wanted to share recommendations to help people avoid annoyance.

For example, all of the seals are made of silicone, which is simpler to work with than rubber since it is more flexible, but it can cause problems when used with metal steam hose seals, which are particularly problematic.

It is possible that twisting the steam hoses in such a way that they rotate on the seals, which would not be a problem with hard rubber gaskets, will cause the soft silicone gasket to become out of shape and result in a leak if the steam hoses move when the seals are “pinched” by being tightened at all.

  • Always keep in mind that a pot should never be used as a high-pressure system.
  • The pressure generated is far less than that produced by an aquarium air pump, and is virtually non-existent.
  • When it comes to the main pot, you don’t even have to tighten the spring arms.
  • Clamps are the only thing available on the kicker, thus they must be utilized.
  • Check both pots carefully for dents and for warps in their general shape.
  • On May 5, 2021, a review will be conducted in the United States.
  • Because the seals are so poor, the pressure from the pot itself forces it out of the pot itself.
  • The cooling pot is also small, and the valves that are placed leak through the handle, which is a last problem.
  • Purchase that has been verified Early Reviewers Will Receive Bonuses (Can you tell me what this is?) This rack is just fantastic!

Apart from being useful, it also looks fantastic and has improved the amount of available storage space in my kitchen, making dishwashing an easier and even joyful process.

Alcohol Yield

One of the most often asked questions we receive from clients who purchase a Whiskey Still is: how much alcohol can I anticipate my copper whiskey still to produce? It is, of course, quite impossible to provide a precise response. The quantity is determined by a variety of parameters, including the ingredients, the amount of sugar, the kind of yeast, and the final proof. A general rule of thumb is that you will obtain roughly 10-20 percent of the capacity of a still. For example, a 5 gallon whiskey still may theoretically generate 1 gallon of moonshine, while a 10 gallon copper still could potentially give 2 gallons of ethanol.

  1. Essentially, this is determined by two factors: the amount of sugar present in the mash and the type of yeast you choose to employ.
  2. The presence of sugar, whether obtained from fermentation or added by the distiller, is vital for producing a strong beginning alcohol.
  3. This does not imply that you should go overboard with the sugar; rather, it implies that following a good recipe to the letter is usually a smart idea.
  4. The type of yeast you use is also highly crucial to your results.
  5. When selecting yeast, take into consideration other elements such as your fermentation conditions, ingredients or the distillate you want to produce, and then make your selection.
  6. I also included final proof as one of the essential criteria on which alcohol yield is dependent, because strength is exactly proportional to quantity in the case of alcohol.
  7. Also possible is the use of cutting, since only skilled distillers will make the most of their distillate and gather just the perfect quantity of delightful shine, not too much so that it has an awful flavor, but not too little so that any of the good thing is wasted.

How to Make the Smoothest Mash Recipe for Moonshine

I’ve been producing moonshine for more than two decades and have experimented with a variety of formulas and measuring techniques. In spite of the fact that I have tried with every sort of ingredient possible, the smoothest mash I have ever prepared is so basic that it will take your breath away. The following dish is also suitable for those who are new to cooking. This recipe does not rely on complicated components to break down starch chains into sugars, as is the case with many others. This dish is quite easy to make.

The key weapon is sweet feed, as you may have guessed.

Enjoy! Check out my podcast where I talk about how to manufacture moonshine from start to finish, as well as how to market it!

Why is the mash recipe so important?

When it comes to the flavor of the whiskey, the mash is by far the most crucial thing to consider. Consider the following scenario: you go on a whiskey run and the whiskey turns out to be 110 proof. This indicates that it contains 55 percent alcohol. As a result, the remaining 45 percent is made up of the water that came from the mash. As a result, the final product is significantly influenced by the mash. The entire amount of the mash produced by this recipe, including the grains, is 30 gallons.

Smoothest Mash Recipe Ingredients

  • Sugar, yeast, and water are used in the preparation of sweet feed (unpelletized). Are you looking for more mashed potatoes recipes? Obtain 20 free moonshine recipes delivered directly to your inbox! Take advantage of 20 tried-and-true recipes that are simple, tasty, and time-saving. After you’ve gathered your supplies, you’ll need to figure out how many gallons you’ll need to make your batch. Using varied size recipes for mash batches, I’ve constructed the chart below, which is measured in gallons. The batch size may be changed easily by simply inserting different values from the chart into the following instructions:

Moonshine Batch Sizing Table

Gallons Grains (gallons) Yeast (Tbsp) Sugar (lbs)
30 5 6 25
20 3.5 4 16
10 2 2 8
5 1 1 4
2.5 .5 .5 2

Step-By-Step Guide To Making Moonshine

Sweet feed (non-pelletized); chopped maize; sugar; yeast; water; and More Mash Recipes are available here. Sign up to receive 20 free moonshine recipes emailed to your inbox. Take advantage of 20 tried-and-true recipes that are simple, delicious, and quick to make. After you’ve gathered your ingredients, you’ll need to figure out how many gallons you’ll need to make your recipe. Using varied size recipes for mash batches in gallons, I’ve constructed the chart below. You may change the batch size by simply inserting different numbers from the chart into the steps that follow.

Step Two: Mix the Mash

Pour the cracked grains into a 30-gallon container and whisk in 25 pounds of sugar until well combined. When the sugar has completely dissolved, add 15 to 20 gallons of cold water at a time until the mash mix reaches a total volume of 30 gallons (by volume). Sweet feed and yeast pack are added to chopped corn. After hearing from a number of my readers that it can be difficult to get unpelletized sweet feed for this recipe, I developed an ingredients package that you can purchase that has everything you need to mash a 10 gallon batch.

Step Three: Add the Yeast

When the temperature of the mash has cooled to the temperature advised by the yeast manufacturer, you can proceed to add the yeast to it. I’ve discovered that 1 tablespoon of yeast per 5 gallons of mash produces satisfactory results. The greatest results will be obtained with distiller’s yeast. I’ve discovered that the Red Star brand works really well and is extremely reasonably priced. Red Star Yeast is difficult to come by in your area, but you can order it from Amazonhere.

Step Four: Let the Mash Ferment

All that remains is for you to wait. Allow for approximately a week for the mash to do its thing. It is finished until you can no longer see the bubbling that is created by the yeast as it releases carbon dioxide from the mash. Once the fermentation process is complete, filter the liquid to remove the spent particles and transfer the liquid to your still for further processing. The wash is the name given to the last liquid. The only thing you want to do is put the wash into the still. That’s all there is to it!

In case you’re interested in making your own DIY project on a budget, I’ve created a two-part video lesson that you can watch: A prefabricated still kit for home usage, like as this one from Vanell, is also available on Amazon.

Get your mash going, place your order for the still, and by the time your mash is finished, your still will be delivered to your home!

Summary

It is now only a matter of time until you may begin to relax. Set aside for about a week to allow the mash to do its thing. It is finished until you can no longer see the bubbling that is created by the yeast as it releases carbon dioxide from the mixture. Upon completion of the fermentation process, filter the liquid to remove any wasted particles and transfer the liquid to your still. The wash is the name given to this final liquid. The only thing you want to do is send the wash through the still.

Yes, I did say it was simple!

Start your mash, place your order for the still, and the still will be delivered to your home by the time your mash is finished!

FAQs

FAQsiwm23jqhl a6920iinwltm2021-12-14T21:49:39+00:00 a6920iinwltm2021-12-14T21:49:39+00:00

1. How much shine can I expect to produce when I run my still?

When it comes to purchasing a still, this is the question that everyone has on their mind. It is all a matter of mathematics, and some individuals provide solutions based on “strange” mathematical reasoning. The truth is depends on how you mash things together. The fermentation process, which takes place prior to the distillation process, will have a significant impact on how much you may anticipate to generate. Average ABV (alcohol by volume) during the fermenting process should be between 10 and 15 percent (as measured by volume).

  • The fermentation process produces alcohol and carbon dioxide as byproducts (when yeast eat sugars).
  • Most yeast strands become extremely agitated as a result of their living circumstances when the ABV reaches around 18 percent.
  • Having a high ABV (16 percent or above) comes at the expense of having a greater level of alcohol/shine that is not worth drinking from a flavor viewpoint.
  • This series provides a deliciously smooth shine with a pleasant taste.
  • You will then receive an honest assessment of the amount of shine to be expected.

If your alcohol by volume (ABV) is 15 percent, your total volume will be 1.5 gallons. You can’t disagree with the math, no matter what still you use to extract the alcohol from the mixture during the distillation process.

2. Why are moonshine stills made from copper?

Actually, copper is not the only material used to construct stills. Some people make use of stainless steel and other metals, while others utilize alternative materials. Due to the fact that copper is an excellent heat conductor, the heat from the still is distributed uniformly throughout the whole surface of the still. This results in a distillation process that is nearly flawless. Copper, on the other hand, has a number of other advantages. Almost all whiskey connoisseurs think that whiskey created from copper tastes better than whiskey made from other materials.

When you run a moonshine still, the fermentation of yeast produces sulfur, and sulfur imparts a harsh flavor to the whiskey produced.

Copper sulfate will adhere to the interior of your copper still, making your whiskey significantly smoother as a result of this reaction.

3. What gauge copper do we use?

Actually, copper is not the only material used to construct all stills. Certain metals, such as stainless steel and other alloys, are utilized by some people. Due to the fact that copper is an excellent heat conductor, the heat from the still is distributed uniformly throughout the whole surface. Consequently, the distillation process becomes nearly perfect. Copper, on the other hand, has several other advantages. It is almost universally agreed upon by whiskey connoisseurs that whiskey distilled from copper tastes superior.

During the fermentation process of a moonshine still, the yeast produces sulfur, which gives whiskey its distinctively bitter flavor.

Copper sulfate will adhere to the interior of your copper still, resulting in a smoother whiskey overall.

4. Are stills illegal?

This is a difficult topic to answer since there is no ideal solution. Owning a moonshine still is totally legal in the United States, but you must first get a “distilled spirits permit” or a “federal fuel alcohol permit” from the appropriate government agency. In other words, you can have it, but you won’t be able to use it until you have your permit. The permit is reasonably priced and simple to get. For additional information, go to www.TTB.gov/spirits/spirits-permits.shtml or call 1-877-TTB-PERMITS.

The production of 100 gallons per year is permitted in some places, like as Missouri. Others, such as New York, on the other hand, only permit manufacture if you are a distillery. We urge that you look into the exact regulations that apply in your region so that you can make an educated choice!

5. Do we report or record customer information to the government?

NEVER. God, nation, and family are the three things in which we at North Georgia Still Company believe. We are patriots in the truest meaning of the word, and we are proud of it. Your conduct on your property is neither our business nor the business of anybody else, even Uncle Sam.

You might be interested:  Where To Buy Ole Smoky Moonshine In Indiana? (Solved)

6. Can I order a custom still? How does it work?

Absolutely! Custom work is one of our favorite types of projects to complete! We ask that you contact us and let us know what you’re searching for so that we can better assist you. If you have any drawings or particular measurements, please email these to us as well. Even if you are unsure of exactly what you want, we are here to assist you in your search! All of our bespoke work is backed by a satisfaction guarantee that is 100 percent unconditional. Please keep in mind that bespoke work may take longer to complete than the lead periods listed on our website.

7. Why don’t we provide fittings and extra copper tubing for our standard still sets?

Over the years, we’ve learned that every person’s setup is different; there is no “one size fits all” solution. Furthermore, when it comes to the sort of fittings they want to utilize, the majority of people have their own preferences. As a result, rather than attempting to anticipate what our consumers want or need, we let them make their own decisions. This is America, and we believe in the power of liberty! For those who don’t care about the details, we also have an assembly kit available.

8. Where can I find copper tubing and compression fittings?

It’s easy to find everything you need to finish your setup at Home Depot, Lowe’s, or any other local hardware shop in your area. For those of you who live too far away from civilisation, you may get everything online, or you can include an assembly kit with your order!

9. What kind of warranty do I get with my still?

You entrusted us with your hard-earned money. We will fix, replace, or otherwise correct any problems that may emerge as a result of frequent use. To be clear, if you opt to shoot your still with a 12 gauge and then notify us that it leaks, we may not be able to provide a complete replacement for your still. We will, however, attempt to correct the situation if possible. We create high-quality stills that you will be able to pass on to your grandchildren. It is un-American to accept anything less.

10. What is your privacy policy?

We will never, ever, ever disclose any of your personal information with any third party.

11. Do we ship in a plain box?

Yep. We use basic brown cartons that are really uninteresting. Your nosy neighbor will be none the wiser as a result of this.

12. What happens if my product is damaged in shipping?

Please get in touch with us right away! It is important for us that all of our clients open and examine their products as quickly as possible. It is important not to be alarmed if yours gets damaged in transportation. We’ll take good care of you, we promise. If your product has been damaged during delivery, please do not use it until it has been repaired. Contact us as soon as you have taken images of the box and the damage.

13. Can I use a propane burner?

Yes! Propane heaters are fantastic! Make sure you pick one with a heat throttle that can be adjusted. This will allow you to manage the rate at which the distillation takes place. Keep in mind that the slower you go, the better. Using a piece of sheet metal as a barrier between your burner and the still is highly recommended.

This will allow for more uniform heat distribution to the bottom of the still and will also assist to prevent the still from becoming burnt on the bottom. Please go to for instructions on how to correctly set up your account.

14. What else can my still make besides alcohol?

A still may be used for a variety of purposes. Customers who manufacture essential oils, gasoline, and distill water are among those who do business with us. A is still a fantastic tool for those who are preparing for the future. Fresh water and fuel may be extremely important in an emergency situation!

15. What if my still is defective?

If you are experiencing difficulties with your still, please let us know. Please contact us as soon as possible so that we can get you a replacement! You send us an email with your contact information. We’ll keep you informed about any new developments and new recipes. a link to the page’s load

The Thumper Keg Explained – What it does and how it does it! – Learn to Moonshine

You should let us know if you are experiencing difficulties with your still. In order for us to get you a replacement, please contact us as soon as possible. Our email address is provided by you. Updates on current events and recipes will be sent to you through email. a link to the page load

Figure 1, Typical backwoods whiskey still. Smaller copper pot in center is thump keg.

In the absence of a thump keg, a standard pot still is capable of distilling a wash into merely a “low wine,” which will contain around 40-50 percent alcohol. A second or even a third distillation is required to attain the high alcohol concentration required to produce high-proof whiskey or other spirit at the desired strength. European distillers still employ swan-neck pot stills, and they will have two stills: one for distilling the wash to a low-wine condition, and another for rectifying the low-wine state into a high-proof spirit.

This is accomplished in an exceptionally smart manner by the thump keg, which utilizes waste heat from the still pot to do its task.

In fact, it is the thumping sound of the hot vapor exiting the still (Fig.

Because this hot vapor repeatedly warms the low wine to the boiling point of alcohol, it is effectively distilled twice, yielding a far higher-proof product than could otherwise be achieved in a single pass through the pot still.

Figure 3, Diagram showing flow of vapor through still and thump keg

In spite of the fact that it has apparent benefits over the traditional pot still, how does it compare to a more complex reflux column still? Of course, for the backwoods moonshiner, there’s the obvious advantage of having materials on hand at all times. The cost of purchasing enough Raschig rings or copper scouring pads to fill a big fractionating column is far less than the cost of locating and reusing an abandoned wooden barrel. A properly constructed column, on the other hand, is capable of producing alcohol concentrations that are close to the theoretical maximum, in some cases exceeding 95%, while also providing better separation between the ethyl alcohol and the esters and ketones in the heads and the heavy fusel alcohols in the tails.

  1. These people include traditional moonshiners and connoisseurs of single-malt, pot-distilled Scottish whiskeys.
  2. Although it is arguable to what degree this is genuine and how much is simply mythology, it is unquestionably true that the taste differences between cuts will be less noticeable and that more of the “whiskey” qualities will be present in the final product.
  3. He even spends several thousand dollars to install a high-tech thump keg to replace the fractionating column in the distillery.
  4. Finally, it should be noted that a thump keg may be used to impart taste in a different way as well: it can be utilized in the same way that a gin basket is used to give flavor.
  5. Because more of the volatile flavoring compounds will be carried over into the final distillate as a result of this method, the taste will be fresher and more full-bodied than merely adding these ingredients to the mash.

The following video is a demonstration of a classic copper pot still, thumper, and worm set up that I discovered on YouTube. ” alt=””> ” alt=””> Any queries concerning thumpers may be asked in the comments area below, and don’t forget to follow us on Facebook and Instagram! Thanks for reading!

Discount Stillz 20 Gallon – Heavy Copper Moonshine Still

This 20-gallon heavy copper moonshine still is made to order by our skilled craftsmen. For several generations, we have been building moonshine stills. We’ve got it down to a science! This still is capable of generating more than 4 gallons of shine in a single running cycle. This is a substantial still that is more than capable of performing its functions! Your still appears to be the same as the one in the photograph. It’s truly a wonder of beauty in its own right. Today, we received our package.

  • The wrapping was just stunning.
  • Once again, thank you so much.
  • Jennifer K.
  • If you are interested in learning more about our Layaway Plan, please click here for more information.
  • The product came today, and I am completely blown away by the quality of the shipping container, which was wrapped neatly and securely…
  • Pete B.
  • Not all stills are generated in the same manner.

Our company is not a production company; nevertheless, we do generate the highest-quality stills that money can buy.

Make sure you don’t make an expensive mistake just because you were attempting to save a few dollars.

You’ll be pleased you took the time to read this.

The reality is that we take care of everything for you!

For the most part, the stills that are offered for sale are thin and fashioned of low-quality 16 gauge roofing copper.

Using thick 20 ounce 99.9 percent pure copper, we construct each and every still we make.

Every one of our stills contains a significant quantity of silver by weight.

It also has a temperature indicator on the boiler, which is convenient.

A better-built still is not available for purchase anywhere else on the internet!

Don’t be like that.

We do not provide any sales information to any third-party agencies.

We respect your privacy and will never share your information! If you have any queries about this, please do not hesitate to contact us at 800-590-4387. To place your order over the phone, please call us at 800-590-4387 if that is more convenient for you.

What do you get when you buy a still from us?

In addition to the recipes, you will receive complete setup instructions so that you will know precisely how to set up your still! We are accessible to assist you before to, during, and after your event. Only liquid mash should be used in the still. Never use a firm mash in a blender. Features: a 20-gallon pot with an integrated temperature gauge Drainage with a 3/4-inch ball valve

  • Height: 38 inches
  • Diameter: 15 inches
  • 1 inch Line Arm Length: 14 inches, which is shortened to 1/2 inch with a Union connection
  • Total Set Up Length: 55 inches

Thump Keg with a capacity of 2.75 gallons

  • 1 1/2′′ Brass Flush Out
  • 12′′ long 1/2′′ Cross Pipe with Union Connections
  • 1 1/2′′ Brass Flush Out

Condensing Worm in a 2.25 gallon container

  • 7 feet of copper condensing coil
  • 1 inch in/out hose connections
  • 7 feet of copper condensing coil
  • This moonshine still is made with 20 ounces of grain alcohol. The copper used is 99.9 percent pure Paul Revere copper, with all silver solder and no lead. Our moonshine still ideas were developed with generations of knowledge and expertise in mind, and it shows. Purchase a better Moonshine Still if you can locate one for sale somewhere else. To ensure unrivaled durability, all seams are hemmed and the main boiler is riveted together. That is how to make a still a dependable piece of distillery equipment
  • This still can also be modified with a high efficiency220 voltelectric burner system, which may significantly cut your energy expenditures when compared to propane. It is not one of those low-cost moonshine stills available for purchase on the internet. In fact, it’s “the” moonshine kit in the world of moonshine still kits
  • This moonshine still is constructed from 20 oz. Paul Revere copper is 99.9 percent pure, and all of the solder is silver! Use of our 220 volt burner system is recommended for upgrading your still. This improvement will result in a significant reduction in your energy bills. The use of propane may be rather costly. Our burner technology is powered by electricity.

It is possible to make moonshine with 20 oz. of grain alcohol. All silver solder is used, and the copper is 99.9 percent Paul Revere pure. Our moonshine still blueprints were developed with generations of knowledge and expertise in mind, and it shows in the final product! Any better Moonshine Still for sale can be found elsewhere, so go out and get one. To ensure maximum durability, all seams are hemmed and the main boiler is riveted together. That is how to make a still a dependable piece of distillery equipment; this still can also be modified with a high efficiency220 voltelectric burner system, which may significantly cut your energy expenditures when compared to using propane.

Thismoonshine still kit is “the” moonshine kit in terms of moonshine still kits; this moonshine still is produced using 20 oz.

We propose that you improve your still by using our 220 volt burner system..

When it comes to gas, it can get pricey fast!

  • This 20 gallon cooper moonshine still has been built to be utilized with a propane stand burner unit
  • However, this is not required. You are not need to utilize this in a straight arrangement
  • Nevertheless, it is recommended. This should still be done outside if you’re working with combustible materials or if you’re utilizing natural gas, wood, or propane
  • Nevertheless,

This moonshine still has the capacity to produce more than 4 gallons of whiskey every batch. This will still provide excellent service to you. When your guests see this still and taste the delicious shine that YOU created, they will be completely blown away and amazed! This still is capable of generating more than 4 gallons of shine in a single running cycle. SHIPPINGWe send all of our stills by FedEx, and we provide free delivery to clients in the continental United States of America (48 States).

We will contact you via email to notify you that your item has been sent and to provide you with a tracking number if applicable.

The workmanship on our moonshine stills is completely guaranteed, and we stand by our products.

PAYMENT We accept all major payment cards, as well as PayPal.

We understand that some of you may want to pay using a check rather than a credit card.

We will be delighted to collaborate with you. * This is an estimate of the time it will take for your order to ship. Actual wait times may be shorter OR longer depending on the level of demand currently in existence.

1 звезда2 звезды3 звезды4 звезды5 звезд (нет голосов)
Loading...

Leave a Reply

Your email address will not be published. Required fields are marked *