Categories Interesting

How To Care For Moonshine Sansevieria? (TOP 5 Tips)

Keep the leaves dry and prevent overwatering as it may cause root rot. Also, lower the frequency of water to once a month when the temperatures start dipping low. Feed your moonshine plants with a general-purpose plant food twice a year in the spring or summer. Don’t overfeed the plants.

What do you need to know about Sansevieria moonshine?

  • The plants main feature are the long twisted green leaves. Sansevieria Moonshine can be quite beautiful when it is well-taken care of. This succulent type needs typical watering as the other succulents we often talk about. The watering method is very important to keep your plants healthy.


How often do you water moonshine snake plant?

During the Sansevieria Moonshine’s active growing season watering should occur once every two weeks. The growing season for this plant is during the warmer months of spring to summer. In the winter months, the frequency of watering should be reduced to just once a month.

Is Moonshine Sansevieria rare?

Moonshine is the rarest of all the 8 types of snake plants available. Moonshine Sansevieria is an amazing evergreen periennial succulent.

How big do Moonshine snake plants get?

Snake Plant Moonshine has silvery-green foliage that reaches a maximum of about 16 inches. It stays extremely compact, and growth is near-vertical without branching.

Do Sansevieria need lots of sun?

They grow more quickly in brighter light, but strong direct sunlight burns leaves, especially when plants are outdoors. An ideal spot is about 10 feet away from a west or south window. Temperature: Snake plants thrive in hot, dry environs. Consider placing potted ones outside for summer in bright shade.

Why are snake plant leaves turning yellow?

The number one cause of yellowing leaves among Sansevieria plants is overwatering. Sansevieria basically thrive off of neglect–they don’t need much water to survive. Only water when the top 50% of soil is dry. Be sure to discard any excess water that flows into the saucer.

What are the benefits of snake plant?

Remove toxic pollutants Snake plants are also known for their ability to help remove toxic air pollutants. Though in small contributions, snake plants can absorb cancer-causing pollutants, including CO2, benzene, formaldehyde, xylene, and toluene.

How do you care for Sansevieria Fernwood?

Easy does it! Hold off watering your Fernwood Mikado until the soil is completely dry as excess moisture can lead to root rot.

  1. Light. Sanseviera Fernwood Mikado does best in moderate to bright, indirect light, but can also adapt to low light conditions if preferred.
  2. Humidity.
  3. Toxicity.

How do you take care of Sansevieria black gold?

Sansevieria ‘Black Gold’

  1. Planting Instructions: Keep the snake plant at the same soil level when planting in a new pot.
  2. Soil Requirements: Keep the soil slightly moist but do not over saturate the plant.
  3. Growth Rate: Slow.
  4. Winter Care: Give more indirect light to your snake plant during the winter due to shorter days.

Is it rare for a snake plant to bloom?

Most people don’t realize this rugged, ubiquitous houseplant (Sansevieria trifasciata) can sometimes flower. This is a rare occasion and will never happen more often than once annually, usually in the springtime, and usually only with plants living outdoors year-round.

Why is my snake plant light green?

A healthy snake plant has pump, fleshy green leaves. If you see wrinkles in the leaves, it could be a signal that the snake plant has root rot, which means it has been overwatered to the point that the roots have been damaged. Look for light green baby leaves poking through the surface.

Why is my Sansevieria wrinkled?

A wrinkled snake plant is a sign of underwatering, high temperatures, or too much sunlight. Move the plant to a spot where it will receive bright indirect light then water it only the soil to dry out to fix the wrinkled leaves. Maintain an optimum temperature of 55-85°F to keep sansevieria healthy.

When should I repot my snake plant?

The best time to do this repotting is in the late winter or very early spring. This puts the transplant during the time of year that the plant’s not in active growth mode. But if needed, it can be performed at any time of year. You’ll know it’s time when roots start creeping through the drainage holes of your pot.

Can snake plants go outside in the summer?

Snake plants should do well outside through spring, summer, and early fall. However, you must bring them inside before the first frost. Frost can badly damage the leaves of your snake plant leading to wilting. Thus, make sure you get them in by late fall.

Can snake plant survive in dark room?

Not only are sansevieria a plant-hoarder’s dream, they also thrive on neglect. They don’t need to be watered often and the plants will be just fine in a dark corner of your living room. Just keep them away from direct sunlight where their leaves may fade.

Sansevieria Trifasciata Moonshine Care Guide for Beginners

The leaves of this species, which is the most well-known of all the Snake Plants, are what the species is renowned for and whence it gets its name. This plant’s wide, upright leaves are an attractive silvery-green tint that gives it a moonlight appearance. As a result, it has earned a variety of nicknames, including Silver Moonshine, Moonlight Snake Plant, and Sansevieria Moonshine. It is important not to criticize this succulent based on its name or look. Despite the fact that it is lovely and exquisite, it is also tough and resilient.

The Sansevieria Moonshine plant is a cultivar of the Sansevieria trifasciata, which means “Moonshine plant.” The S.

The Silver Moonshine itself is made in a nursery setting.

Sansevieria trifasciata Moonshine Care Guide

The Sansevieria Moonshine is a low-maintenance plant that thrives with minimal attention. Your plant will have the most attractive silver-green leaves if it is exposed to bright, indirect light. It is essential to have soil that is free-draining. Keep irrigation to a minimal and only after the soil has dried out is the most effective technique to minimize root decay. Silver Moonshines enjoy higher temperatures and do not require any additional humidity to grow properly. During the course of the growth season, you should only feed your plant once or twice.


Because it is a succulent, the Sansevieria Moonshine can withstand periods of drought. This indicates that it despises damp soil. When selecting soil for your Silver Moonshine, drainage is a critical consideration. In this case, a well-drained soil mix, such as one made specifically for succulents or cacti, is recommended. Soil-free potting mixes are also effective since the organic matter utilized retains less moisture than soil. The root rot of this plant is a danger to the plant. It is conceivable that a soil that takes longer to drain water can increase the rot of the plant’s roots.


As is true of most Sansevierias, the easy-going Silver Moonshine isn’t finicky about the lighting conditions in which it grows. It can tolerate a wide range of environmental conditions, from direct sunlight to complete shade (with light). Not all lighting circumstances, on the other hand, are optimal. It will be able to live in a variety of lighting settings, but it will not always be at its best. If your plant is exposed to bright, direct sunlight, it may begin to show indications of sun blistering.

Silver Moonshines should be maintained in a bright, indirect light source whenever possible.

This, in turn, results in a thriving Sansevieria Moonshine industry.

All it need is some time to adjust to the new environment.

Allow your Sansevieria Moonshine to adjust to the new lighting conditions for a short period of time. Slowly increase the amount of time the plant spends in that light until it has fully adapted. Spending the entire day in the new location is required for complete adjustment.


The Sansevieria Moonshine is a plant that can withstand drought conditions. Drought tolerance refers to the fact that your plant does not require extensive and repeated watering. The Silver Moonshine requires only a small quantity of water to maintain its strength and health, as well as to survive in the wild. The Sansevieria Moonshine is a succulent that holds water in the leaves of its stems. In the eyes of the law, overwatering your Silver Moonshine is a severe violation. Overwatering can cause root rot, which will ultimately result in the death of your gorgeous Silver Moonshine plant.

  1. For this plant, the growing season is from the spring through the summer months, when the weather is warm.
  2. During the colder months of winter, the plant enters a dormant condition, during which time it ceases taking in nutrients and absorbing water.
  3. If you are making Sansevieria Moonshine, you should use the least quantity of water possible.
  4. Before you water your plant again, be sure that the soil has totally dried out before doing so.


A warmer environment is preferred by this particular plant. The Silver Moonshine can withstand temperature fluctuations, but not temperatures below 5°C (41°F). The temperature of your plant will begin to suffer harm at lower temperatures than this. Scarring of the Silver Moonshine’s leaves is one type of harm that might occur. Keep the Sansevieria Moonshine at temperatures ranging between 13°C and 29°C (55°F and 85°F) at all times for best results.


It is not necessary to add any more humidity to the Sansevieria Moonshine. It is vital to let the soil to dry out between waterings; therefore, more humidity is not required in this situation. The humidity in the space should be maintained on a regular basis. Silver Moonshine plants will thrive in any environment, regardless of the humidity levels present in the environment in which they are housed. This is a tough and adaptable plant that will rapidly become acclimated to its new environment.


Maintaining your plant’s optimal conditions will support healthy development. However, because the Silver Moonshine is a slow-growing plant, feeding it might be beneficial in order to give it a jump start. The only time this should be carried out is during the growth season, which is throughout the months of summer and spring. A maximum of twice a year fertilization is all that is required for your plant’s growth. It is recommended that you use fertilizers designed for succulents and cactus kinds when you are doing so.

Overfeeding your Sansevieria Moonshine is not recommended; only a tiny quantity of fertilizer is required. A surplus of fertilizer is detrimental to the health of your Silver Moonshine, and it may suffer as a result. During the winter, you should avoid fertilizing your plant.


It is absolutely logical that you would want to spread your Silver Moonshine! Who wouldn’t want to see more of these stunning ladies? It’s a good thing the procedure is straightforward, and there are a few suitable options available. The division of your Sansevieria Moonshine is one of the most successful and efficient methods of propagating your plant. If you like, you can also use leaf cuttings instead of offsets, if that is what you prefer. Another option for propagating your plant is to use its rhizomes, which are a type of rootstock.

Not only is it tough to obtain seeds owing to the plants’ blooming troubles, but it is also a time-consuming and complex process.


The Silver Moonshine plant is a strikingly stunning specimen. Growing it both indoors and outdoors is possible due of its hardiness. This unique plant is prized for its stunning silvery leaves, which are a sight to behold. Occasionally, the Silver Moonshine’s large leaves will have narrow, dark green borders around their edges, which distinguishes it from other plants. The white and silver tones in the newer leaves are more noticeable. The color of the leaves darkens as they mature, occasionally becoming a deeper green altogether.

  1. Low illumination, on the other hand, has no negative impact on the health of your Sansevieria Moonshine.
  2. They may grow to reach anywhere from 0.6m and 2m in height, depending on the variety (2ft to 6ft).
  3. This cultivar has the potential to blossom on unusual occasions.
  4. Your Silver Moonshine will be adorned with white flowers that have a mild smell, if it blooms and produces flowers at all.


Silver Moonshine plants produce wonderful potted plants because of their silvery foliage. These plants thrive well in containers such as planters, pots, and flowerpots because of their compact nature. Always select a pot or container with drainage holes to ensure proper water drainage. Certain containers will also aid in the drying out of your plant. Terracotta pots are ideal for this purpose. The Sansevieria Moonshine does not require repotting on a regular basis. In fact, when this plant is root-bound, it thrives.

Often, your plant will communicate with you if it is feeling overloaded and needs to be moved to a larger container.

In the event that you don’t want to wait for your plant to outgrow its container, you may repot it every three to four years.

If additional potting soil is required, it should be added. During the warmer months of the year, it is essential to repot your Silver Moonshine. This is because the plant enters a resting phase during the winter months. It is possible that repotting will cause it to go into shock at this period.

Sansevieria Moonshine Propagation

Propagation is an excellent method of increasing the size of your collection of these gorgeous plants. It is a straightforward procedure. Several methods are available for propagating Silver Moonshine, including division, leaf cuttings, and offsets. It is quite simple to use the division approach. As soon as your plant has reached maturity, you can separate any clusters of leaves that have become congested. Once this is accomplished, the clusters of leaves should be detached from the rootstock.

  1. These may then be planted one by one into a potting mix that has been thoroughly watered.
  2. offsets are also called as new rhizomes in other instances.
  3. It should be accompanied by a healthy leaf from your Sansevieria Moonshine plant.
  4. It is not necessary to water the offsets right away.
  5. Finally, leaf cutting may be used to propagate a variety of plants.
  6. The cut edge of the Sansevieria Moonshine leaf should be allowed to dry and callous before being used again.
  7. Once the leaf-cutting has been scabbed over, it can be planted in well-draining soil at a depth of around 2.5cm (1in).
  8. If possible, your new plants should be put in an area that receives plenty of bright, indirect light.
You might be interested:  Where Can I Buy Climax Moonshine In Kentucky?

Common problems with Sansevieria Moonshine

Sansevieria Moonshine plants are quite trouble-free in terms of maintenance. The only concerns that may occur are those that are the result of a lapse in judgment. They are, on the other hand, rather simple to repair in the majority of situations. Root rot, darkening of the leaves, and mild bug infestations are examples of these difficulties. A lack of irrigation will result in root rot in your Silver Moonshine plant. The Sansevieria species is particularly susceptible to it. Although it is capable of adapting to a variety of light conditions, keeping your plant in very low light may result in the color of its leaves becoming dark green.

The only pests that might trouble your Silver Moonshine would be spider mites or mealybugs, which are both quite rare.

They may also be prevented with relative ease.

Tips to keep Sansevieria Moonshine problem-free

Silver Moonshine plants are a delight to be around. Only water them until their soil is completely dry, and avoid giving them too much water at once. Avoid exposing them to direct sunlight in order to prevent their leaves from becoming burned. In addition, to maintain them pest-free, clean the leaves with a moist cloth to eliminate any dust that has accumulated on them.

That is all there is to it when it comes to keeping your Sansevieria Moonshine healthy and happy. It is not essential to overthink your plant’s care regimen; it is just not necessary. Overthinking and overdoing things is likely to bring more damage than good to your plant’s environment.

Frequently asked questions about Sansevieria Moonshine

The leaves of the Sansevieria Moonshine plant, if consumed, are somewhat poisonous to both animals and humans. Keep your plant out of reach of cats, dogs, and small children at all times. It is likely that ingesting Silver Moonshine will induce gastrointestinal and oral discomfort.

What benefits does the Sansevieria Moonshine possess?

The Silver Moonshine is a fantastic air purifier that is easy to use. It produces oxygen throughout the day, every day, even at night. They also absorb potentially dangerous chemicals from the air, such as formaldehyde.


Silver Moonshine is a perennial and evergreen shrub that is really stunning. Aside from its stunning and distinctive silvery foliage, it requires very little upkeep. Who wouldn’t want this uncommon and beautiful flower to grace the interior or outside of their house or garden? And if its striking appearance isn’t enough to convince you, consider its unparalleled capacity to filter the air around it more effectively than any other plant! Marcel is in charge of everything around here. He has a strong interest in houseplants and gardening, and he is continuously on the hunt for new and interesting plants to add to his collection of succulents and cactus houseplants and garden.

Your guide to helping your gorgeous moonshine snake plant thrive!

Get to know the beautiful moonshinesansevieria trifidiata plant and how to take care of it! With a few differences, caring for a moonshine snake plant is very similar to caring for other snake plants. Learn how to retain your moonshine snake’s bright hue and what to do if your snake starts to become a deeper shade of green.

How do you care for a moonshine snake plant?

Today, we’re going to speak about moonshine snake plants! I now have two of the same plant in my collection, which is unusual for me because I rarely allow myself to have two of the same plant. (If I had more space, I’d have 100 of each plant, but unfortunately, that’s not possible in a townhouse.) This tutorial is all about how to care for and propagate moonshine snake plants. Despite the fact that its care is similar to that of other snake plants in that it is extremely low-maintenance and easy to cultivate, there are a few things to keep in mind when cultivating this stunning species.

Moonshine snake plant/ sansevieria trifasciata origins

Let’s start with a basic discussion regarding snake plants. The official scientific name for the snake plant is dracaena trifasciata, however it was formerly known as sansevieria trifasciata until it was realigned to the dracaena genus in 2017. Old habits, on the other hand, die hard. You’ll have to work hard to pull the term sansevieria from my cold, dead, and fearful of change hands. Whatever the case, it’s most commonly associated with the sansevieria genus, which you can learn more about here.

Snake plants bloom, but it isn’t the flowers that draw people to them in the first place.

A total of approximately 70 different snake plant species exist, with moonshine being one of them.

However, instead of the typical trifasciata’s towering deep green leaves with silver/gray patterns, the moonshine’s leaves are a stunning light minty green, which contrasts well with the rest of the plant. If you’re very lucky, you could even get a glimpse of silver.

Is Moonshine snake plant rare?

Even these moonshine snake plants aren’t considered uncommon, they are more difficult to come across than other of the more frequent species, such as the trifasciata, which is considered rare. (I have a list of 18 distinct snake plant kinds in my snake plant care page, which you can see here.) When I bought my first snake plant pup, it was from someone who I met on a Facebook plant buy/sell/trade group. I hadn’t seen snake plants in many places before that. In June of 2021, I came across them in a large box nursery for the first time.

When I did come across them, the price point was often a little more than that of regular ol’ sansevieria trifasciata, which was disappointing.

What is the ideal light for a moonshine snake plant?

A range of illumination conditions are tolerated by thesansevieria moonshinetolerans, which are similar to other snake plants. Snake plants are well-known for their ability to thrive in low light conditions. The moonshine, on the other hand, is more forgiving than its deeper green siblings. Moonshine snake plant care varies from other snakes in that it requires bright indirect light, rather than direct sunlight. Although it will continue to develop even under low light conditions, the rate of growth will be slower.

  1. The leaves will eventually darken and become more of a medium green in color, giving it a more natural appearance similar to that of other snake plants.
  2. Moreover, once the leaves have become black, they will not brighten again.
  3. I didn’t notice the difference when it occurred; it was only later that I realized, “Wow.” This plant isn’t as light as it used to be, which is unfortunate.
  4. In the end, I relocated it to the interior of the greenhouse, under one of the grow lights.
  5. When the plant generates enough new growth, I’ll most likely clip off the darker outside leaves at some point in the future.
  6. It appears to be unjust, but in this situation, science is on our side.
  7. Can you see the difference in color between the darker leaf on the right and the brighter leaf in the center of the picture?


Want to read my 60-page guide on taking care of 8 of the most simple houseplants on the planet?

It’s completely yours! Simply enter your email address here, and I will send it to you directly.

Moonshine snake plant growth rate

Moonshine snake plants can grow to be a little more than 2 feet tall, depending on the variety. Even while snake plants, in general, are renowned for their sluggish growth rates, I have to admit that some of my snakes have grown at some quite astounding rates! I believe that people typically believe snake plants are slow growers since they are commonly considered of as low-light plants, which means that people do not provide them with a lot of light while they are growing them. They are able to survive, but they do not thrive.

Give your snake plant brilliant indirect light, on the other hand, and it will thrive!

Just make careful to gradually bring them closer to the sunlight to avoid shocking them and causing leaf burn.

Moonshine snake plant care: Water and soil needs

Sansevierias, in general, are a tough and drought resistant succulent plant due to their succulent nature. To kill a snake plant, overwatering it is the most effective method of doing so, and this is certainly the case with the moonshine plant. When the soil around your moonshine snake plant becomes dry, water it. This occurs around once a month in the spring and summer, and approximately once every two weeks or so in the fall and winter. I’ve even reduced my watering frequency to every 3–4 weeks during the winter months out of sheer laziness.

  • Any succulent or cactus soil will suffice for this purpose.
  • When I recently repotted my larger moonshine snake plant, I used a typical indoor potting soil that was well-draining and free of weeds.
  • More information about the soil additives I like to keep on hand can be found here.
  • Although, I will admit that some of my snake plants are grown in pots that do not have drainage holes.
  • Be forewarned

Should I fertilize my moonshine snake plant?

I don’t fertilize any of my snake plants, but that is primarily due to my laziness when it comes to fertilizing. I use worm castings into my soil combinations in order to supplement nutrients. Using this method prevents me from accidentally over-fertilizing and burning the plants, as I have previously done. In order to fertilize your moonshine snake plant, simply purchase a cactus/succulent or indoor houseplant fertilizer from your local garden shop and follow the guidelines on the label for that particular type.

Temperature needs

Snake plants will perish if they are kept outside in temperatures below freezing. I leave my snake plants outside till the temperature dips to around 60 degrees Fahrenheit in the evening at night. Despite the fact that they have withstood a few cold spells below that temperature. According to what I’ve read, sansevieria plants can live in any outdoor environment with temperatures over 32 degrees Fahrenheit (freezing).

But I haven’t put it through its paces yet… I don’t want to harm my plants in any way. However, it gets much colder than that in our area, so they, along with the rest of us, are forced to stay indoors.

Are moonshine snake plants toxic to pets?

Unfortunately, all snake plants include saponins in their leaves, which is a bad thing. In both people and animals, saponins can cause gastrointestinal difficulties, oral irritation, and vomiting. Saponins are a kind of tannin that is fairly hazardous to both humans and animals. It goes without saying that these plants are not intended to be consumed. I’m comfortable with keeping my moonshine snake plant in the vicinity of my cats, though, because they aren’t bothered by it at all. Two dogs are different in that one has no teeth and the other prefers to grass and puke it up.

Also see my post on 16 plants that are not hazardous to pets for more information.

Moonshine snake plant issues

Because these plants require very little upkeep, there isn’t much more to be concerned about. There are a few things, though, that you should keep an eye out for.

Pest issues

Moonshine snake plants are not very susceptible to insect attack. I’ve never had any severe insect problems with any of my snake plants, however spider mites, mealybugs, and fungal diseases aren’t unheard of in the snake plant world. I wrote a whole piece about how to get rid of spider mites on houseplants, which you can read here. Despite the fact that I do not yet have an article dedicated to mealybugs, I can tell you that they are terrible tiny cotton-looking creatures. If you notice clear sap residue or ants surrounding your plant, inspect it for mealybugs and treat it with a houseplant pesticide to prevent further infestation.

Root rot and yellowing leaves

Moonshine snake plants are also susceptible to problems that might arise as a result of overwatering. Intense watering will cause root rot, which is the most effective approach to destroy a snake plant as soon as possible. To avoid this problem, follow the instructions in the section on watering and soil on this page. Taking your snake plant out of the soil and trimming off any dead or dying (typically yellowish) leaves, as well as any mushy black roots, and allowing it to dry for an hour or two to allow it to air out before repotting with fresh well-draining soil, is the best way to treat root rot.

How to propagate a moonshine snake plant

I have a very popular post on the many different ways to grow a snake plant, which you can read here. I’ve tried every single one of them! Check out that site for more information, but for now, here’s an overview of the best ways to grow a moonshine snake plant.

Propagate a moonshine snake plant by division

Making two moonshine snake plants via division is as simple as cutting a section of one plant off of another to create two new plants from the original one. This is similar to the cheater propagation method… However, it is instantaneous!

  1. Take the plant out of the soil and examine the rhizome structure for clues. (Rhizomes are the vast white root systems that link the many components of the snake plant under the soil’s surface.)
  2. A clean knife can be used to slice into the center of a rhizome, cutting the plant’s baby (or branch) off from the mother plant. Allow that tiny callus to callus over for a day or two on a surface. Make sure to plant in a well-draining soil and keep it wet for many weeks. When you try to pull the plant and it resists, reduce the amount of water you are giving it to regular snake plant levels.

See the structure that connects the primary mother plant on the left with the baby/offshoot on the right? That’s what I’m talking about. That’s what the rhizome looks like. Take a swipe at it!

Propagate a moonshine snake plant by leaf cuttings

A single leaf of a snake plant can also be used to propagate the plant.

It takes an eternity, but the results are spectacular! Here’s how you go about it.

  1. Cut a single leaf into pieces that are 2–3 inches long. Please make a mental note of which direction was up. Plant in a soil that drains properly. Make sure to keep the soil moist
  2. Roots will ultimately develop and a new plant will grow.

Snake plant leaf cuttings buried in the ground A snake plant leaf cutting resulted in the formation of two new growth sites!

Propagating in LECA…

Alternatively, you might take a single leaf cutting and place it in water or LECA (clay balls). Water should be changed every 1–2 weeks. You can plant the leaf once it has developed some strong roots (which normally takes many months). Despite the fact that I have not produced a large number of snake plant cuttings in LECA, I can tell you that one of my whale fin snake plant leafcuttings remained in water for an indefinite period of time without doing anything. When I moved it to LECA, it skyrocketed in terms of growth!

You might be interested:  What Temp To Pitch Yeast For Moonshine? (Solved)

LECA snake plant leaf propagation is a kind of leaf propagation.


My free 50-page book will assist you in getting started with the propagation of seven simple houseplants!

Moonshine vs. night owl snake plant

The hahniinight owl snake plant, also known as the moonshine plant, is sometimes mistaken with it. However, because it is a hahnii (as opposed to the moonshine, which is a trifasciata), it is a whole distinct species of plant. Short and thick in appearance, Hahnii snake plants tend to spread out rather than growing upward. Similar in appearance to the moonlight, the night owl is distinguished by the presence of a yellowish border.

Moonshine vs. gray lady snake plant

Grey lady is a different sansevieria type that is frequently mistaken with moonshine in the marketplace. Gray lady’s leaves are slender and pale greenish gray in color. However, based on what I’ve seen online, it looks that the leaves are a little thinner and that the gray banding is a little more prominent.

Pin my moonshine snake plant care tips!

LIGHTYour Sansevieria is a hardy plant that can withstand a variety of conditions. It loves indirect light that is medium to bright, although it can survive lower light levels as well as direct sunlight. WATEROnly water your Sansevieria when the soil is fully dry on the surface. Fill the pot with water until the liquid drains out of the drainage hole at the bottom of the pot. Discard any water that has gathered in the saucer at this point. TEMPERATUREYour Sansevieria will grow in temperatures ranging from 55 degrees to 85 degrees Fahrenheit.

HUMIDITY You should keep your Sansevieria in a dry area.

FOODFeed your indoor plants once every six months using a liquid fertilizer designed specifically for indoor plants.

In most cases, intake will result in tongue and stomach discomfort, as well as the possibility of vomiting.


LIGHTYour Sansevieria is a hardy plant that can withstand a variety of conditions. It loves indirect light that is medium to bright, although it can survive lower light levels as well as direct sunlight. WATEROnly water your Sansevieria when the soil is fully dry on the surface. Fill the pot with water until the liquid drains out of the drainage hole at the bottom of the pot. Discard any water that has gathered in the saucer at this point. HUMIDITY You should keep your Sansevieria in a dry area.

TEMPERATUREThe Sansevieria can tolerate temperatures ranging from 55 to 85 degrees Fahrenheit; however, they prefer temperatures in the upper 80s.

Sansevierias are only minimally hazardous to both pets and people, according to the Environmental Protection Agency.

In most cases, intake will result in tongue and stomach discomfort, as well as the possibility of vomiting. More CARESansevierias are a low-maintenance, hardy plant that requires little additional attention.

Sansevieria Golden Hahnii

LIGHTYour Sansevieria is a hardy plant that can withstand a variety of conditions. It loves indirect light that is medium to bright, although it can survive lower light levels as well as direct sunlight. WATEROnly water your Sansevieria when the soil is fully dry on the surface. Fill the pot with water until the liquid drains out of the drainage hole at the bottom of the pot. Discard any water that has gathered in the saucer at this point. HUMIDITY You should keep your Sansevieria in a dry area.

TEMPERATURE Your Sansevieria will grow at temperatures ranging from 55 to 85 degrees Fahrenheit on average in your home, although they prefer to be maintained on the warmer end of the temperature spectrum.

Sansevierias are only minimally hazardous to both pets and people, according to the Environmental Protection Agency.

More CARESansevierias are a low-maintenance, hardy plant that requires little additional attention.

Sansevieria Moonshine

LIGHTYour Sansevieria is a hardy plant that can withstand a variety of conditions. It loves indirect light that is medium to bright, although it can survive lower light levels as well as direct sunlight. WATEROnly water your Sansevieria when the soil is fully dry on the surface. Fill the pot with water until the liquid drains out of the drainage hole at the bottom of the pot. Discard any water that has gathered in the saucer at this point. HUMIDITY You should keep your Sansevieria in a dry area.

TEMPERATURE Temps ranging from 55 to 85 degrees are suitable for the Sansevieria Moonshine; however, they prefer temperatures in the 70s and 80s.

TOXICITY Your Sansevieria Moonshine is only minimally hazardous to both pets and people, according to the manufacturer.

ADDITIONAL CAREYour Sansevieria Moonshine is a low-maintenance, hardy plant that doesn’t require any special attention or maintenance.

Sansevieria Sayuri

LIGHTYour Sansevieria is a hardy plant that can withstand a variety of conditions. It loves indirect light that is medium to bright, although it can survive lower light levels as well as direct sunlight. WATEROnly water your Sansevieria when the soil is fully dry on the surface. Fill the pot with water until the liquid drains out of the drainage hole at the bottom of the pot. Discard any water that has gathered in the saucer at this point. HUMIDITY You should keep your Sansevieria in a dry area.

TEMPERATURE Temperatures ranging from 55 to 85 degrees Fahrenheit are ideal for your Sansevieria.

Sansevierias are only minimally hazardous to both pets and people, according to the Environmental Protection Agency.

ADDITIONAL CAREWipe the leaves of your Sansevieria down with a moist cloth every couple of months to keep them looking fresh. This helps to eliminate dust, which helps to maximize photosynthetic efficiency, and it also helps to deter pests from taking up residence.

Sansevieria Cylindrica

LIGHT It performs well in indirect bright light, but it may also be used in low light conditions. WATERWATER when the soil volume is completely devoid of water. Water the plant thoroughly until the water runs out of the drainage hole. After a few minutes, remove any surplus water from the dish and discard it. HUMIDITYYour Sansevieria Cylindrica thrives in the usual humidity of a typical household. TEMPERATURE Your Sansevieria Cylindrica will thrive in temperatures ranging from 55 to 85 degrees Fahrenheit.

TOXICITY If the Sansevieria Cylindrica plant is swallowed, it is harmful to both pets and humans.

ADDITIONAL CARE This helps to eliminate dust, which helps to maximize photosynthetic efficiency, and it also helps to deter pests from taking up residence.

Whale Fin Sansevieria

LIGHT Your Whale Fin Sansevieria will grow more in indirect light, but it will still be able to maintain itself at lesser light levels as well. Water your Whale Fin Sansevieria until the earth is completely devoid of moisture (when the soil is completely dry). When the soil is completely dry, thoroughly water the area until you see water flowing out of the drainage hole. After a few minutes, drain out any extra water that has accumulated. HUMIDITYSansevierias thrive in conditions ranging from low to moderate home humidity.

FOODFeed your indoor plants once every six months using a liquid fertilizer designed specifically for indoor plants.

ADDITIONAL CAREDust the furniture on a regular basis to keep pests away and to maintain the distinctive striped pattern looking its best.

How to grow and care for Sansevieria Moonshine?

Sansevieria Moonshine is a rare silver-leaved cultivar of the well-known snake plant, Sansevieria spp (Sansevieria Trifasciata). It features lovely light silvery green leaves with dark green leaf edges on a light silvery green background. As the leaves mature, they become a gentle green color with a faint cross banding. This cultivar, which was grown in a nursery, is a relatively recent hybrid. Despite this, it is just as tough as the majority of snake plant variants. It is a unique addition to your house and is an excellent choice for the busy gardener who wants to get some work done.

Let’s take a look at how to take care of the lovely sansevieria moonshine plant.

Plant appearance and growth rate

A variety of popular names for this plant are derived from the silvery green tint of its leaves, such as silver sansevieria and Moonlight/Moonshine snake plant. The length of a leaf is marked by thin green lines that span the whole length of the leaf. With time, the leaves may become somewhat darker in color, but their silvery sheen will remain intact. You’ll note that the leaves develop in clusters of two or three.

Each of these parts comes together to produce a magnificent vase-like shape. These plants have a reasonably high growth rate due to the fact that they are one of the fastest and easiest of the Sansevierias to cultivate. Moonshine snake plants can reach a height of up to 2 feet when fully grown.


When water accumulates around the rhizome structure of moonshine snake plants, the plants become prone to root rot. As a result, drainage capacity is a crucial consideration when selecting a soil. These plants thrive in soil that is sandy, gritty, and fast-draining in nature. Never allow your Sansevieria to sit in damp, soaked soil for an extended period of time. It has the potential to cause root rot if left untreated for an extended length of time. Sansevieria Moonshine can be grown in the same potting mix that is used for succulents and cacti in most gardens.

Drainage can be improved by mixing in some sand, perlite, or gravel.

For additional information on the finest soil components for snake plants, please see this link.

For example, if it becomes too old and wet after years of usage, it should be replaced.


Sansevieria Moonshine is an excellent choice for container gardening. Beautiful containers for snake plants are readily available on the market in a variety of shapes and sizes to suit your needs. They are available in a variety of popular materials such as terracotta, plastic, and ceramic, as well as wood, metal, and other materials, to give your plant a unique aesthetic touch. Personally, I like light-colored (white or cream) pots for Sansevieria moonshine since they tend to draw attention to the silvery green leaves of the plant.

The drainage holes are the most important item to check for when purchasing a home.

If this is not an option, plant your plant in a well-drained container that is placed within a larger decorative pot to provide additional drainage.

Also, be certain that the container is appropriate for the size of your plant.

Watering regimen

Due to its status as a succulent, Sansevieria Moonshine requires little water in order to be healthy and flourish. It is a drought-tolerant plant, which means that it can thrive without being watered on a regular basis. Overwatering this plant might result in the plant rotting and eventually dying. Following are some instructions on how to water the plant:

  • Before you water, inspect the top layer of the soil surface (1-1.5 inches deep). The soil should be completely dry between waterings
  • Depending on the environment and surrounding circumstances of the plant, you can water once a week or once every other week, as needed. For example, plants kept in the shade require less water than plants grown in the sunlight. You may find that your plant need more regular watering if you reside in a tropical climate. When watering, make careful to keep the leaves completely dry. Depending on the form of the rosette, water might accumulate between the leaves, resulting in a fungal infection or rot. Slowly pour water into the drainage holes until it begins to trickle from the holes. Allowing the extra water to drain away is highly recommended. The water in the drainage saucer should be discarded after approximately 30-40 minutes. Don’t let the plant sit in the water that has accumulated. During the winter, reduce the frequency of watering to once a month as the temperatures begin to drop.

If you have any more watering-related queries, you may find more information in this page.


Indoor Sansevieria moonshine grows best in indirect light that ranges from moderate to bright. Despite this, this plant can endure full light provided the conditions are not too extreme. Low light conditions will not be a problem for this plant at all. It appears to be content with a small amount of early sun and brilliant filtered light during the rest of the day. The color of the Moonshine plant’s leaves can be somewhat altered according on the lighting conditions.

The hue of the plant’s new leaves is a very pale grey-green that is nearly ice-white in appearance. Plants that thrive in heavy shadow, on the other hand, have darker foliage. Avoid planting in locations that are excessively dark, since this might cause the plant’s development to be stunted.


Sansevieria Warmer regions are ideal for moonshine production, as it can withstand high temperatures quite well. However, it is not as cold-hardy as some other houseplants, which is a shame. Depending on your climate, it may be necessary to provide additional heat and dry air during the winter months. During the warmer months, maintain the plant in a shady or semi-shaded location. It is best to grow moonshine plants at temperatures ranging from 55 to 85 degrees Fahrenheit (13 to 29 degrees Celsius), although the plants can also handle higher temperatures.

Temperatures below 32 degrees Fahrenheit (0 degrees Celsius) might cause lasting harm to the leaves.

Pests and Diseases

To its advantage, this hardy plant is seldom affected by significant disease or insect issues. Snake plants are not susceptible to illness due to their tough nature and the strength of their succulent leaves. In the unlikely event that any pests infest your Sansevieria moonshine, it will most likely be either mealybugs or spider mites. These pests, on the other hand, are not very difficult to deal with. There are simple methods for getting rid of them and restoring the health of your plant. Learn how to protect your plant from insects and fungal issues by reading this page.

If it is exposed to frigid conditions for an extended period of time, it may develop scarring on the leaves.

Water remaining on the leaves also leads in mushy leaves, which are more vulnerable to various illnesses as a result of their condition.


Two or three times a year is adequate for feeding your moonshine plants, and it works really effectively. Using a general-purpose fertilizer designed specifically for houseplants is a smart option. A balanced mix, which indicates a 10-10-10 or 5-5-5 ratio of nitrogen, phosphorus, and potassium, is recommended (N-P-K). You may also use organic or natural fertilizers, but you should only apply them in small amounts. During the spring and summer seasons, it is most beneficial to feed your plant.

Add slow release fertilizer once a year at the beginning of summer or at the end of spring if you are using a slow release product.

More information may be found in this fertilizer guide.


Repotting your Sansevieria Moonshine is required to prevent the plant from becoming overgrown, since it grows at a quicker rate than the majority of Sansevieria. Repotting also improves the appearance of the plant in its new, larger container by keeping it nice and tidy. Typically, this needs to be done every two to three years. Repotting makes the plant stronger by promoting the development of robust root systems.

However, although you may transplant your plant at any time of the year, the spring and early summer are the best times to accomplish this task. For the most part, repotting your moonshine snake plant is a straightforward process.

  • Make certain that you get a pot that is the suitable size. A thin layer of pebbles should be placed at the bottom of the new container to conceal the drainage holes, which should be 1-1.5 inches bigger in diameter than the old one. After that, cover it with a layer of dirt. Remove your plant from its previous container with care, and brush off any sticky dirt that has accumulated around the roots. Using a fresh pot, place the root ball in. Then, using the soil mix, fill the remainder of the container up. Plant it at the same height as you did previously. Don’t bury the leaves in the ground. Allow the soil level to be at least 1 inch below the lip of the pot
  • At the conclusion, thoroughly water the plant and allow the soil to dry before watering it again
You might be interested:  Which Popular Soft Drink Brand Was Named After A Slang Term For Moonshine?

For a more in-depth tutorial on repotting your snake plant, see this page.

Grooming and Maintenance

Sansevieria Moonshine, like the majority of snake plants, is noted for being relatively low-maintenance. Although this plant flourishes when left to its own devices, this does not imply that you should entirely disregard it. The appearance of leaves might suggest the presence of root rot in the plant. As a result, you may need to remove any yellowed or damaged leaves. Some leaves will naturally die over the course of time, and those will also need to be trimmed back to their original position.

If, on the other hand, your plant has outgrown its container, you can divide it from the roots and propagate new plants.


In general, snake plants are best reproduced by division because they have a robust rhizome and root system that grows swiftly and efficiently. A large plant with well-established roots and several leaf sections will be required for this task, so start thinking about your options now. In the wild, the Sansevieria moonshine plant grows in rosettes, with 2-4 leaves in a region. A simple method is to divide each portion while ensuring that each segment has a sufficient number of roots at the base.

This guide contains further information on the propagation process.

This is how you may go about it:

  • Remove the base of a mature, healthy leaf and discard it. Make portions at least 2-3 inches long from it
  • It is preferable to keep the regions around the wounds dry and callous before transplanting them. Place each portion of the plant in a shallow container with the bottom side facing up in a well-drained potting mix. A one-inch-deep hole should be dug for the leaf cuttings. Maintain a modest level of light or indirect sunlight for the container. 1-2 inches long roots will emerge on the cuttings after a couple of months, at which point they can be transferred to form new plants.

Pets and kids safety

Moonshine snake herbs are poisonous if they are chewed or consumed. They have the potential to be somewhat harmful to people and animals. As a result, it is preferable to keep them away from curious youngsters and dogs. When consumed, it has the potential to induce oral and throat discomfort. If you consume high amounts of alcohol, you may have nausea, diarrhea, stomach discomfort, and vomiting.

Uses and Benefits

Sansevieria moonshine plants are excellent indoor pot plants because of their low water requirements. With its erect leaves, this plant may be easily accommodated in even the tiniest of spaces in your home. These plants will look great in any corner or on any window sill you choose. Direct planting in the ground is another option, but be sure to maintain them in semi-shade at all times. Depending on the temperature, it can thrive as an outdoor plant in warmer climes or as an interior plant in cooler climates.

It has the capacity to remove contaminants from the air in enclosed spaces such as offices.

Sansevieria Trifasciata Moonshine care, images and videos

This Snake Plant variety, originally from Africa, has a very distinctive pale silver-grey-green foliage with dark green margins that will become dark in shade. Sansevieria Trifasciata Moonshine has a very unique light silver-grey-green foliage with dark green margins that will turn dark in shadow. In addition to surviving in low light circumstances and being drought-tolerant, Sansevieria Moonshine is a hardy plant that is ideal for novices since it can be left to dry out between waterings and thrives in a variety of soil types.

The species of Sansevieria Trifasciata have slightly poisonous chemicals that cause discomfort in the stomach and mouth when ingested or consumed.

Sansevieria Moonshine care

In low light settings, Sansevieria Moonshine survives, but it flourishes best in strong light, and it enjoys a few hours of direct sunlight each day. If you don’t give your Sansevieria Moonshine enough light, it won’t develop much and won’t be able to show off all of its color since its leaves will get black. If you give your snake plant plenty of strong light, on the other hand, it will grow more quickly and its pale silver-grey-green leaves will be more prominent.

How to water a Sansevieria Moonshine?

In order to be healthy and grow, snake plants require very little water to maintain their shape. Furthermore, Sansevieria is a drought-tolerant plant, and over-watering, which causes root rot, is the most prevalent cause of death in this species. Use a terracotta or porous material container to ensure that the soil does not become soggy between waterings, and make sure that you do not overwater the plant.

What’s the ideal humidity for a Sansevieria Moonshine?

Sansevieria Moonshine thrives at regular room humidity, but it will thrive even more if the humidity is raised.

How to fertilize a Sansevieria Moonshine?

Because Sansevierias are light feeders, they don’t require a lot of fertilizer. In fact, too much fertilizer causes the leaves to fall over on the plant. During the summer, feed your plant once a month with a slow-release fertilizer.

Sansevieria Moonshine care tips

  • If you have any reservations about watering your Snake Plant, don’t. Make use of pots made of porous materials so that they may absorb the humidity. Keep the leaves clean and healthy by wiping them down with a moist towel and gently drying them
  • Please keep your sansevieria away from pets and children since it can cause oral irritation in cats and dogs
  • Because of its ability to remove air pollutants, Sansevieria is a suitable choice for placement in living rooms and bedrooms

Video tutorials of snake plant care and tips

The films may not be about the exact same plant, but they may be about the same kind. In the majority of situations, this is not important because many of the kinds have the same criteria as one another.

  • Summer Rayne Oakes developed a video to demonstrate how to properly care for a snake plant. How to care for a snake plant, as demonstrated in this video by delaplants. About how to care for a snake plant, check out this video prepared by Good Growing

Rare Moonshine Snake Plant Care

Snake Plant – often known as Moonshine – is scientifically known as Sansevieria MoonShine. A cultivar of the Sansevieria trifasciata, they are a kind of fern. They have also lately been reclassified as ‘Dracaena’, rather than ‘Sansevieria’. These plants are members of the ‘Asparagaceae’ (also known as Asparagus) family of plants. Snake Plants, sometimes known as Moonshine Plants, are native to the tropical areas of West Africa. Sansevieria moonlight is another name for this plant, which is also known as “Mother-in-Tongue,” Law’s “bowstring hemp,” “Saint George’s sword,” “silver snake plant,” and “Sansevieria Moonlight.” The ‘Snake Plant’ is the most well-known name for this plant.

Moonshine Sansevieria is a spectacular evergreen perennial succulent that blooms in the springtime.

Moonshine – Snake Plant is a beginner-friendly, easy-to-grow succulent that is ideal for beginners.

It is also a fantastic alternative for folks with hectic schedules who are seeking for a succulent that requires little maintenance.

Moonshine Snake Plant Color, Size,Growth

The popular name ‘Moonshine’ comes from the hue of its silver-grey-green leaves, which are silver-grey-green in appearance. Leaves may also have subtle dark green streaks across the surface of the leaf and dark green borders on the edges. Interiors that are contemporary and minimalist would benefit greatly from this decision. Moonshine – Snake Plant is a highly popular houseplant that is easy to care for. If maintained in optimal circumstances, it has the potential to reach a height of up to 6 feet.

The leaves of this plant grow vertically from the base, giving it an incredible architectural appearance. It is a succulent plant with a rapid growth rate that may add a striking appearance to any room in the house or business.

Moonshine Snake Plant Benefits

In addition to providing an interesting atmosphere to your indoor space, Moonshine – Snake Plants and different species of Snake Plants offer a lot of health advantages that have been shown via scientific study.

Natural Air-Purifier

Snake Plant Moonshine – Snake Plants have the incredible capacity to cleanse the air around them. According to a research done by NASA in collaboration with the Associated Landscape Contractors of America (ALCA), Snake Plants, in particular, as well as some other indoor plants, have the power to cleanse the air in the home. According to the findings of the study, one snake plant is required for every 90 square feet of space in order to adequately filter the air. Remove air pollution from your home or business by placing a snake plant in each room of your residence or office building.

It is one among the most effective indoor plants in terms of producing oxygen.


snake plants make moonshine because of their amazing capacity to filter the air. Snake plants make moonshine because they purify the air. According to a research done by NASA in collaboration with the Associated Landscape Contractors of America (ALCA), Snake Plants, in particular, as well as some other indoor plants, have the capacity to cleanse the air in a home or office environment. According to the findings of the study, one snake plant is required for every 90 square feet of floor space in order to adequately detoxify the environment.

Snake Plants, according toHarvard University, release oxygen around the clock.

Better Sleep

Snake Plants create moonshine because they have a unique photosynthetic process that allows them to synthesize oxygen even when it is dark outside. Other home plants, on the other hand, are unable to do so. This assists you in obtaining a better night’s sleep and waking up feeling refreshed in the morning. When it comes to your bedrooms, snake plants are a fantastic choice.

Drought Resistant

In general, succulents are quite popular because of their drought resilience. They necessitate the use of relatively little water. Due to the fact that their roots are prone to rotting due to overwatering, Moonshine-Snake Plants do not require a lot of water.

Moonshine Snake Plant Care

Snakes Plants thrive in USDA Hardiness Zones 10 to 11, where they grow exceptionally well. They are extremely fast-growing plants that require little maintenance. If you are a newbie who is interested in indoor succulent plants, Moonshine – Snake Plants are the most suitable alternative for you.

Simply wipe away the dust with a moist cloth, and your plant will be good to go for another seven days. This resistant succulent is usually devoid of any severe insect issues, which is unusual for this species. Mealybugs and spider mites can be a nuisance, but they are relatively easy to deal with.

LightTemperature Needs

They are at their best and flourish in practically all indoor lighting environments. They can also live in full to partial sunlight when exposed to the elements outside. From 55 to 85 degrees Fahrenheit is the optimal temperature range for their development. Snake plant may also thrive in low-light circumstances and can survive over long periods of time. In short, as long as your room is not completely dark, this magnificent succulent will thrive in any lighting situation.

Watering Needs

The amount of water they require is really small. It is not necessary to water them on a regular basis. Don’t overwater this plant since its roots are susceptible to rotting as a result of over watering. It is always preferable to allow the soil to dry fully between two waterings. Prior to watering, check to see that the top inch of soil is fully dry before proceeding with the process. The plant may require watering twice a month during the warmer months, but in the winter, water it once a month and your plant will remain completely healthy.

Soil, Fertilizer,Repotting Needs

Moonshine – Snakes and Ladders Plants do not require any particular type of soil. When planted in a container, they will thrive in any typical mix for succulents and cacti. To avoid root rot caused by overwatering, it is recommended that you choose a container with drainage holes as previously described.. In order for any excess water to drain away. They simply require a general purpose fertilizer twice a year, and that is all they require. As long as your plant is not getting root bound, there is no need to repot it.

Propagation Needs

Snake Plants, also known as Moonshine Plants, are easily reproduced using offsets or leaf propagation methods. The young plant should be planted in well-drained soil if you are employing the offset approach. It is not necessary to water immediately after repotting. When the soil has totally dried out after 7 days of repotting, give them a good drink. You should use the leaf propagation approach if possible. Take a leaf from the parent plant and cut it. Make use of a tall container and fill it with water so that just the lowest 1 to 3 inches of the leaf is wet at a time.

Water should be changed as needed.


It is only minimally poisonous to both humans and animals. It contains’saponins,’ which can cause vomiting and nausea in dogs and cats if consumed by these animals.

Moonshine Snake Plant Amazing Facts

The following are some fascinating facts about the moonshine-snake plant that are less well-known.

  • Snake plants have been authorized by NASA for their ability to filter the air they breathe. Reduce the incidence of airborne allergens
  • When it is harvested, it produces a fiber that was originally used to construct bowstrings in Africa. Oya, the female orisha of storms, is related with the yellow-tipped snake plant, which grows wild in Africa. In Nigeria, it is linked with Ogun, the orisha of battle
  • In the United States, it is associated with the orisha of death. This remedy is also widely used in Africa for the removal of the evil eye. It is associated with the patron saint of Portugal, Saint George. It was because of this that it became known as ‘Saint George’s Sword’.

Snake Plant Varieties

Snake Plants are available in seven other types, in addition to the Moonshine Snake Plant. Which are available in a variety of sizes, shapes, and colors.

Sansevieria triasciata ‘Black Gold’

This is a fantastic option for any interior environment. Its tall green leaves are bordered with a bright yellowish tint that is reminiscent of gold.

Sansevieria triasciata ‘Futura Robusta’

The tint of the leaves is silvery-green with horizontal bands of dark green color.

It has a life expectancy of roughly ten years in an optimum growth environment. Any setting, inside or out, can benefit from this stunning option. It is the shortest of the Snake Plant’s varieties.

Sansevieria triasciata ‘Futura Superba’

It has a color and design that are extremely similar to ‘Black Gold,’ and it is made of the same material. However, it has larger leaves and is not as tall as ‘Black Gold,’ so it is a better choice.

Sansevieria triasciata ‘Cylindrica’

It is sometimes referred to as the ‘African Spear’ because it is a newcomer to the United States. The spear-shaped leaves can be braided or left in their original shape to create a stunning, eye-catching effect for your garden. Their leaves are 3cm thick and have a pointed tip, and they may grow to be up to 7 feet in height, according to some reports.

Sansevieria triasciata ‘Golden Hahnii’

The brightest of all the snake plants, with broad gold margins and a light green core forming a low rosette, is the golden snake plant. It has the potential to grow to be 8 inches tall. A fantastic option for those with little indoor space.

Sansevieria triasciata ‘Black Jack’

Similar in appearance to the ‘Black Gold’ type, but with a lower height. Dark green leaves with thin gold color borders are found on this plant. Gives a distinctive appearance to any interior.

Sansevieria triasciata ‘Black Robusta’

The leaves are a dark green with silver sprinkling. Height is a little shorter.


Snake plant is a fantastic succulent plant to have because of its magnificent vertical leaves, gorgeous patterns on the leaves, and the eye-catching color changes that it exhibits. It is not only simple to grow and beginner-friendly, but it also provides a number of significant advantages.

1 звезда2 звезды3 звезды4 звезды5 звезд (нет голосов)

Leave a Reply

Your email address will not be published. Required fields are marked *