Categories Interesting

How To Make The Mash For Moonshine?

What is the best moonshine recipe?

  • Apple Pie Moonshine. Apple pie flavor moonshine is by far the most popular. Wide Open Spaces suggests to start by stirring 1 quart of apple juice, 1 gallon of apple cider, and 10 cinnamon sticks in a large pot. Once you’ve brought that mixture to a simmer, stir in 3 cups of brown sugar and 1 cup of white sugar.

Contents

How do you make moonshine mash?

Heat 5 gallons of mash water up to 165F. Turn off heat when target temperature is reached and stir in the 8.5 pounds of corn. Stir the mash continuously for about 5 minutes then stir for a few seconds every five minutes until the temperature drops to 152F. Once the target temp is met, stir in the malted barley.

What is moonshine mash made of?

Moonshine mash is the fermented slurry of yeast, corn, sugar, and water that is then distilled to produce a very intense alcohol.

How much corn do I need for 5 gallons of mash?

For a 5 gallon mash: (201) 7 lbs (3.2kg) cracked corn. 6-8 pieces/kernel is the proper crack. If using bird feed, make sure it is perishable, or in other words is free of preservatives. 7 lbs (3.2kg) of granulated sugar.

What is the ratio of mash to moonshine?

For example, for every 1 gallon of water, you would use 1 pound of sugar, and 1 pound of corn meal. So for a 5 gallon mash (which is recommended for your first batches of moonshine) you would use 5 gallons of water, 5 pounds of corn meal, and 5 pounds of sugar.

How do you make moonshine step by step?

Procedure:

  1. Place your mash pot on its heat source and pour in 5 gallons of water.
  2. Heat water to 165 °F.
  3. Turn off heat source when you reach 165 °F and immediately stir in 8.5 pounds of Flaked Corn Maize.
  4. Stir mixture continuously for 7 minutes.

Why was moonshine made illegal?

So why is moonshine still illegal? Because the liquor is worth more to the government than beer or wine. Uncle Sam takes an excise tax of $2.14 for each 750-milliliter bottle of 80-proof spirits, compared with 21 cents for a bottle of wine (of 14 percent alcohol or less) and 5 cents for a can of beer.

What is the best corn for moonshine?

The kind of corn for moonshine that we recommend is cracked, dry yellow corn, and yes, it’s field corn. It should be a good grade corn that is relatively clean.

How much moonshine will 5 gallons of mash make?

A 5 gallon run will yield 1-2 gallons of alcohol. A 8 gallon run will yield 1.5-3 gallons of alcohol. A 10 gallon run will yield 2-4 gallons of alcohol.

Can you make alcohol with just water sugar and yeast?

The key ingredient, sugar, is converted into alcohol by the process of fermentation by the second ingredient, yeast. Homemade liquor can be made easily if you have sugar, water (to form a sugar solution) and baking yeast.

What kind of water do you use to cut moonshine?

One of the most important tips I can give to moonshiners is to always use distilled water for making moonshine wash. It’s no secret that tap water contains a plethora of chemicals, some of which includes chlorine, chlorate, bromate and fluoride.

How do you speed up the fermentation of moonshine?

So, say you brew 5 gallons of beer day one, aerate and pitch an adequate yeast pitch for that size beer, then put 5 more gallons on top of that 12-24 hours later you will drastically speed up fermentation time. Just be sure to aerate each batch well.

Can you put too much yeast in moonshine mash?

The “ 100 grams of dry yeast per 5 gallons” rule only applies to a pure sugar mash where you aim to turn it into vodka or as a base spirit for liquors. Fermenting a wort with more than 4 grams of yeast per gallon will effect undesirable sulfur flavors that can be difficult to get rid of.

Can you use cracked corn for moonshine?

What Type of Corn Should I use in my Moonshine? Our favorite type of corn to be used in moonshine is cracked, dry yellow corn. This type of corn is considered field corn and it needs to be clean and food-grade. It is recommended to use air dried corn rather than gas dried.

How much does it cost to make a gallon of moonshine?

It costs around $8 per gallon for the sugar and wheat to make the moonshine. The selling price is around $25 a gallon if sold in bulk, or $40 for retail price.

How much grain do I need for 5 gallons of mash?

Partial Mash Brewing with a 5 Gallon Pot! A partial mash recipe usually involves mashing 3-6 pounds of grain and then using a lesser amount of malt extract (maybe 3-4 pounds instead of 6-7).

How Commercial Moonshine Mash is Made

Firstly, a quick reminder that distilling alcohol is unlawful unless you have an approved federal fuel alcohol or distilled spirit plant authorization in addition to the appropriate state permissions. Our distillation apparatus is intended solely for legal reasons, and the information contained in this paper is intended solely for educational purposes. We encourage you to read our comprehensive legal statement for further information on the legality of distillation. Moonshine mashes can be made in three different methods, according on the experience of a commercial distiller.

The third approach is inexpensive and simple (and is a suitable starting point for new commercial distillers), but it is not advised for anyone who is serious about producing a high-quality product of consistent quality.

Beginning with the third recipe on this page, a rookie commercial distiller or a distillery that specializes on producing rapid, inexpensive liquor for the purpose of flavoring would be well advised (sugar shine).

The “thin mash” recipe might serve as a good middle ground.

1- Corn Whiskey

Corn sold for a few dollars at market could easily yield several hundred dollars after being mashed, fermented, and distilled, according to early American farmers. Corn also produces a higher output of sugar than other grain crops. In this way, crushing maize and converting it into alcohol became the traditional technique of alcohol production on the early American frontier, giving rise to the term “corn whiskey.” When it comes to crafting a craft spirit, a commercial distiller who wants to produce a high-quality finished product would assume that pure, all-grain whiskey is the way to go.

Listed below is a straightforward method for creating a corn whiskey mash, with some extra alternatives available for the more experienced distiller:

  • The following ingredients: 5 litres of water
  • 8.5 lbs of flaked maize
  • 1.5 lbs of crushed malted barley
  • Yeast- Read this article to find out how much yeast a professional distiller would need in their process.

Procedure:

Bring 5 gallons of mash water to a temperature of 165 degrees Fahrenheit. When the desired temperature is attained, remove the pan from the heat and whisk in the 8.5 pounds of corn. The temperature should decrease to 152F after 5 minutes of constant stirring. After that, stir for a few seconds every five minutes until the temperature reduces to that level. Once the desired temperature has been reached, add in the malted barley. Cook for 90 minutes, uncovering only to stir every 15 minutes or so, until the vegetables are tender.

Allow it to sit for a few hours, or use an immersion chiller to cool the mash to 70 degrees Fahrenheit in minutes.

Fermentation will be completed in a week or two at most. Allow it to rest for another week, and it will be ready to distill at that point. Siphon the stillness out of the room. Make sure to discard any yeast or other sediment that may have accumulated.

Tips for Advanced Distillers

Advanced distillers might consider adding 2 teaspoons of gypsum (CaSO4) to the mash water and altering the pH of the mash water to a range between 5.8 and 6.0 before adding any other additives to the mash water. Following the addition of gypsum, the pH of the mash water should be adjusted lower using citric or tartaric acid. Calcium carbonate should be used if the pH has to be raised (CaCO3). Using tincture of iodine to evaluate if all starches have been entirely transformed into sugar is a second tip for expert distillers who want to improve their skills.

Drop a drop or two of the tincture of iodine onto the sample on the plate and allow it to dry.

Rest it for a longer period of time.

2 – Thin Mash Whiskey

Cooking a thin mash is a simple method for doubling the amount of mash produced while maintaining part of the natural grain taste of corn whiskey produced. Making it involves beginning with a puree, such as the one seen above, and then adding additional water and granular sugar to enhance the amount of wash produced.

Ingredients:

  • The following ingredients: 10 gallons of water (5 gal to begin, then 5 more)
  • 8.5 pounds of flaked maize
  • 1.5 pounds of crushed malted barley
  • 6-8 pounds of sugar

Yeast-Read this page to learn about the proper processes for pitching yeast.

Procedure:

Creating a thin mash is performed in two phases. To begin, prepare the normal corn whiskey mash as instructed previously. After the last resting period, however, add 5 gallons of cold water and 6-8 pounds of sugar to the pot. The mash is ready for aeration and fermentation when the temperature has dropped to 96 degrees Fahrenheit, as indicated in the Corn Whiskey recipe above. Advanced distillers should aim for a specific gravity of roughly 1.08 in their final product. If the concentration is too high, dilute with water.

3- Sugar Shine

Genuine maize whiskey is becoming increasingly difficult to get these days. Modern moonshine is almost always little more than plain sugar with a dash of flavoring added in for good measure. Although it is not as smooth as maize whiskey, what it lacks in flavor and smoothness is more than compensated for by the ease with which it may be consumed. In addition, some people are not fond of the flavor of maize. They would choose apple pie, peaches, or other fruit tastes over anything else. This recipe is perfect for making that particular concoction.

Procedure:

2 gallons of water (no hotter than 120 degrees) should be heated before adding sugar a few pounds at a time. Stir until the sugar is completely dissolved, then add additional sugar. Keep adding sugar until all sugar has been added / dissolved. Pour this mixture into a fermenter and top it over with 3 more gallons of water. To get a final temperature of 96 degrees, increase the heat of the extra water by a small amount. Once the final liquid temperature reaches 70 degrees, add the yeast. Dumping back and forth between two buckets a few times will help to aerate the water.

Even if the distillation environment isn’t as warm, you may cover the fermenter with a blanket and even use a heating pad to keep it warm.

Allow it to rest for one week to ferment and another week to settle before serving. Then, carefully siphon the liquid into a still, taking care not to overfill it (the vapor cone should not contain any liquid).

Is Making Moonshine Legal:

Keep in mind that this information is provided solely for educational purposes. The process of making beer is lawful since it is substantially the same as making beer, which is now permitted in all 50 states, however distilling alcohol is illegal unless an individual obtains a fuel alcohol plant permission or a distilled spirit plant permit, respectively.

A Brief History of Moonshine:

The Great Depression, Prohibition, and limited access to the mountainous region of Appalachia all contributed to the creation of moonshine, a beverage that is now practically forgotten yet has a legendary reputation. The phrase “Moonshine” used to be used to refer to any type of homemade whiskey. In part, the word came up as a result of the fact that early “bootleggers” frequently brewed their whiskey in the middle of the night, under the light of a full moon, in order to keep their activities hidden from neighbors and the authorities.

In the case of moonshine, there is no conventional formula; it can be produced using any mix of grains in any style of still.

How to Make Moonshine: A Distillers Guide Corn Moonshine

This book is a distillers’ guide to making moonshine. Corn Moonshine

How to Make Moonshine:A Distillers Guide For Corn Moonshine

The most recent update was made on October 25, 2021.

You might be interested:  Where Can You Make Moonshine Legally?

Getting Started: Picking Your Type of Moonshine Mash

On October 25, 2021, the most recent update was performed.

How to Make Moonshine: Corn Mash Recipe

  • A five-gallon bucket of water, 8.5 pounds of flaked corn maize, 1.5 pounds of crushed malted barley, yeast, a mash pot, a fermenting bucket, a heat source, a thermometer, and a long spoon.

Procedure:

  1. Start by placing your mash pot on a heat source and filling it with 5 liters of water
  2. Heat the water to 165 degrees Fahrenheit. After reaching 165 degrees Fahrenheit, turn off the fire and quickly whisk in 8.5 pounds of flaked corn maize. Continue to stir the mixture constantly for 7 minutes. Check the temperature every 5 minutes and stir the mixture for 30 seconds each time until the temperature reaches 152 °F. When the liquid has cooled to 152 degrees Fahrenheit, add 1.5 pounds of Crushed Malted Barley and stir well. Check the temperature every 20 minutes and whisk for 30 seconds until the mixture has cooled to 70 degrees Fahrenheit. It takes many hours for this process to complete on its own, however the addition of an immersion chiller can dramatically shorten this timeframe. When the liquid has cooled to 70 degrees Fahrenheit, add the yeast. Allow for 5 minutes of aeration by pouring the mixture back and forth between two different containers. Fill the fermentation bucket halfway with the mixture. We provide entire kits for them as well as the supplies you’ll need to make them yourself. It is critical to have the bucket, cap, and air-lock on hand at all times. The use of a spigot also makes pouring more convenient.

George Duncan over at Barley and Hops Brewing also has a great video onHow To Make a Great Moonshine Mash.Check it out below!

Materials:

  • Materials:

Fermentation

Store the mash at room temperature for 1-2 weeks to let it to ferment. The temperature is critical because if the temperature drops too low, the fermentation will halt since the yeast will become dormant. Make use of a hydrometer and verify the specific gravity at the beginning of fermentation and at the end of fermentation to confirm that all sugars have been used. This will tell you how much ABV (alcohol by volume) was created throughout your fermentation. Make a note of the specific gravity readings taken at the commencement of fermentation and at the conclusion of the fermentation process.

Watch this video to learn how to operate a hydrometer.

Straining

To correct pH, carefully siphon mash water out of the mixture, making sure to leave behind all solid material and sediment. Pour the mash water into a container and set it aside. It is advised that you strain the mashed potatoes through a cheesecloth at this point. The presence of solid debris in your mash water might result in headaches that you’d want to avoid. (Advanced) This is the point at which some distillers will add 2 teaspoons of gypsum to their mash water. After that, they do a pH test on their mash water.

Use citric acid to lower the pH of the water, then calcium carbonate to raise it again.

How To Make Moonshine: Distilling

  • Fermented and strained mash water, cleaning products, and column packing are all used in the production of whiskey.

You did an excellent job! You’ve finished the hard work of making mash water for your moonshine! Congratulations! Finally, distillation and separation of all of the alcohol content into a refined form are required. Similarly to the process of creating mash, distillation is both an art and a science. Exercising your distilling skills is the most effective method to improve. We encourage that you take notes during the procedure so that you can improve with each subsequent run. In the event that you are in need of equipment or supplies, we can help you out.

We have everything from the traditionalcopper still to steel reflux units to the newGrainfatherBrewing System, and everything in between. We also carry high-quality supplies, such as high-quality grains and a new carbon filter, among other things.

Prepping Your Still

Maintaining a consistent level of preparation for your still is essential. However, even if you cleaned and let your still to sit for a bit after your last run, it is still advised that you clean it before transferring your mash water. This is especially true for copper stills that have a salt deposit on their surfaces. If you want to include packing in your column, now is the time. Fill your column with the amount of copper packing that is appropriate for your particular arrangement and use it as a filter.

Last but not least, it’s time to fill the still with your mash water.

The goal here is to reduce the amount of sediment in your mash water to as near to zero as you possibly can.

Running Your Still

Now comes the exciting part! Distillation is a fantastic procedure that takes a long time. Those of you who are unfamiliar with the science may get the fast and dirty version by clicking on the link below. Distillation is the process of separating various compounds by taking use of varying evaporation temperatures between the components. Rather of producing alcohol, this procedure separates it from the rest of the components present in your mash water. During the fermentation process, you produced all of the alcohol (well, the yeast did).

If your arrangement includes a condenser, switch on the condensing water whenever the temperature reaches 150 degrees Fahrenheit.

Keep track of how fast your drips are increasing in pace until you reach 3 to 5 drips per second.

How To Make Moonshine: Collecting Your Distillate

Congratulations, you have progressed from researching How to Make Moonshine to actually creating your own moonshine! Make certain that you are pouring your distillate into a glass container as you are generating it. Never use plastic containers since they can contaminate your product with BPA, among other things, and cause additional problems.

Collecting Foreshots

In terms of percentage of your total production, the foreshots will account for approximately 5 percent. These are the alcohols that evaporate the earliest in your mash water and should never be consumed. Foreshots may contain methanol, and they should never be taken in any form. Methanol, among other things, has the potential to cause blindness. Gather the foreshots and place them in a separate container before throwing them away.

Collecting Heads

It is estimated that the heads account for around 30 percent of your total production. The heads, like the foreshots, contain volatile alcohols as well as other compounds. However, rather than causing blindness, the consequences are more mild – akin to having a bad hangover for many days.

Because to the presence of alcohols such as acetone, the heads will have a characteristic “solvent” scent to them. Similarly to the foreshots, place your heads in their own containers and discard the rest of them.

Collecting Hearts

This is the good stuff, which is primarily composed of ethanol. The following approximately 30 percent of your total production is comprised of the hearts. You should be able to smell the harsh, solvent-like scent that was present during the heads at this stage. The flavor of corn mash moonshine should now be smooth and sweet, as it should have been previously. This is the level at which ability and experience are most important. It takes a certain amount of skill to keep your hearts well-isolated while simultaneously increasing their output.

Collecting Tails

This is the good substance, which is primarily composed of ethylene. The following approximately 30 percent of your total production is comprised of the hearts you produce. You should be able to smell the harsh, solvent-like scent that was present throughout the heads starting at this stage.. A smooth and sweet taste should now be present in the flavor of corn mash moonshine. This is the level at which ability and experience are most crucial. It takes a certain amount of skill to isolate your hearts while also increasing their output.

Conclusion

Congratulations on completing the task. We hope you were able to produce a fantastic batch. The only thing left to do is thoroughly clean your whole equipment. Allow for complete drying before storing in a cold, dry location. Learning how to create moonshine requires you to take on the roles of both a scientific and an artist at the same time. There’s a delicate balance to be struck here, and it can take years to master. We urge that you keep meticulous records of your moonshine production at all times.

  1. Thank you for stopping by.
  2. Thanks for stopping by.
  3. If you enjoyed this advice on how to produce moonshine, you might also be interested in our instructions on how to make rum and how to make vodka.
  4. The most recent update was made on October 25, 2021.

Share This Post With Others!

a link to the page’s load

Sweet Feed Moonshine Mash

There are several moonshine mash recipes available, including Sweet Feed, Rye Bread Whiskey, Peach Moonshine, Coconut Rum, and Grandpa’s Moonshine, to name a few. With all of these varieties, you may want to brush up on your knowledge of how to make moonshine before we get started.

Moonshine continues to be illegal to this day. If you continue to sell, import, or own moonshine while not having the proper official permit, you might face serious consequences. Having said that, hobbyists may still purchase the supplies and create their own stills using these instructions.

1. Sweet Feed Moonshine Mash

There are a plethora of moonshine mash recipes available, including Sweet Feed, Rye Bread Whiskey, Peach Moonshine, Coconut Rum, and Grandpa’s Moonshine, just to name a few examples. In order to properly prepare for making moonshine with these kinds, it is recommended that you first grasp the fundamentals of moonshine production. It is still illegal to sell moonshine today because of this legislation. If you are continuing selling, importing, or owning moonshine while not having the proper official permit, you might face serious penalties.

Ingredients

  • Sugar
  • One box of whiskey yeast
  • Thirteen pounds of sweet feed
  • Six-and-a-half gallons of water
  • And six pounds of sugar

How to Make

  1. Ensure that you have enough feed to cover the bottom of your fermenter bucket
  2. Around 4-5 inches should be plenty. Fill the fermenter halfway with hot water, then add your sugar and mix well. Combine the sugar and water until it is completely dissolved. Fill the remainder of the container with warm water until you have 6.5 gal of mash. If there is any remaining room in the fermenter, it should be at least 3 inches. After the mixture has cooled to approximately 75 or 80 degrees Fahrenheit, add the yeast. Leave it covered with the lid for 5-6 days to allow the flavors to blend. It should be run at 150-160 proof. Before distilling, strain the mash through a fine mesh strainer. This eliminates sediments from the spirit, resulting in a clear spirit. You only need to distill the concoction to be ready to use it

2. Rye Bread Whiskey

The rye bread whiskey recipe is yet another odd and crazy moonshine mash recipe. Pumpernickel is a dark and rich bar of chocolate that may be used to manufacture homemade whiskey. Make sure you buy fresh fruits and vegetables rather than those purchased from a shop because there is a strong risk that they have been treated with preservatives.

Ingredients

  • The ingredients are as follows: 9.00 pounds sugar
  • 6.00 gallons water
  • 3.00 lbs. Rye bread (dark and dense)
  • 0.70 ounces of yeast nutrients (optional)
  • And 0.67 ounces of distillers. Yeast

How to Make

  1. Cut the rye bread into little pieces to make it easier to chew. You may either use a food processor or your hands to do this
  2. The choice is yours. In a large saucepan, combine the bread pieces with 1.5 gallons of water and bring it to a boil for around 5 minutes. Continue to stir continually
  3. When done cooking, remove the saucepan from the heat and stir in the sugar until totally dissolved. Discard any remaining particles and transfer the mash to a fermenter. Fill the tank with water until it reaches the 6-gallon mark. Take note of the temperature, which should be 82 degrees Fahrenheit
  4. And Place the yeast on top of the mash and cover the fermenter with a lid to keep out the air. Shake the fermenter vigorously for 30-60 seconds to add air into the mixture
  5. And Allow for one week of fermentation by storing the bucket in a dark spot at room temperature. When the mash is finished, distill it.

3. Peach Moonshine Mash

Peach moonshine is the perfect drink for those searching for something a bit more fruity and simple to produce. This moonshine mash recipe is excellent since it becomes more mellow with age and has a sweeter flavor when compared to other types of liquor. Peaches can boost your heart’s health and supports your digestion.

Ingredients

  • Peach moonshine is perfect if you’re searching for something a little more fruity and simple to create. As a result, this moonshine mash recipe becomes more mellow with age, and the flavor becomes sweeter when compared to other spirits. Peaches have been shown to boost heart health as well as assist with digestion.

How to Make

  1. Remove the pits from the peaches and mash them up in a large saucepan until smooth. Heat the water until it reaches 150 degrees Fahrenheit by adding it in small batches. In a separate bowl, combine the sugar and mix until thoroughly dissolved
  2. Remove the pan from the heat and allow it to cool to 80 degrees Fahrenheit before serving. Fill the fermenter halfway with the mixture and add the yeast. The lid should be used to secure the fermenter. Allow for a 5-day fermentation period. Remove the mixture from the heat and distill it
  3. A quart of the distilled product should be refrigerated to bring back the taste.

4. Coconut Rum Moonshine Mash

Apart from providing a tropical flavor, coconut rum also has several health advantages due to its high antioxidant content. But first, you must learn how to create rum, which is required before you can brew our coconut rum moonshine.

Ingredients

  • Sugar
  • Rum
  • 16 oz. water
  • 2 mature brown coconuts
  • 0.75 lbs. sugar

How to Make

  1. A 16-ounce glass of water
  2. Two mature brown coconuts
  3. 0.75-pounds sugar
  4. Rum

5. Grandpa’s Moonshine Mash

Your grandpa’s moonshine mash will be the smoothest beverage you’ve ever made. It’s produced with oats, which are a morning staple for many people.

Ingredients

  • Recipe ingredients: 10.0 lbs.White Sugar
  • 6 gal Water
  • 4 oz.Bread Yeast
  • 2.5 lbs.Quick Oats
  • 2.0 lbs.Brown Glucose Syrup
  • 1 Pomelo Fruit
  • 1 Pomelo Fruit rind

How to Make

  1. Combine all of the ingredients in a fermenter by pouring hot water over them and mixing well. Allow it to cool to roughly 80-85 degrees Fahrenheit after stirring until all of the sugars are dissolved. Add the yeast and cover the container with a lid. 7 days of fermentation, followed by 7 days of settling time, until the liquid is clear Remove any junk that has accumulated on the surface of your liquid
  2. Add the pomelo fruit to the still once it has been peeled and chopped
  3. You just need to distill the liquid and you’ll be set to go

Conclusion

In a fermenter, combine the sugars and quick oats with hot water until well blended. Allow it to cool to roughly 80-85 degrees Fahrenheit after stirring until all sugars are dissolved. Fill it halfway with yeast and cover it tightly. 7 days of fermentation, followed by a period of settling, until the liquid is clear Remove any gunk that may have accumulated on the surface of your beverage. Add the pomelo fruit to the still once it has been peeled and chopped; After you distill the liquid, you’ll be ready to leave.

You might be interested:  How Much Yeast Nutrient Is Used For Moonshine Mash Recipe?

How to Make Moonshine Mash

Article in PDF format Article in PDF format Using only a few simple components, moonshine mash is a common method of producing an alcoholic beverage. To begin, combine the cornmeal, sugar, water, and yeast in a large mixing bowl. Afterwards, ferment the mash to make it alcoholic, and distill the resulting liquid to make it delicious to drink. After that, you may consume moonshine mash on its own or mix it into cocktails or other beverages to give them a little more kick.

Ingredients

  • The following ingredients: 2.5 pounds (1.1 kg) ground cornmeal
  • 10 pounds (4.5 kg) white granulated sugar
  • 10 gallons (38 liters) water (preferably distilled if feasible)
  • 1 and a half ounces (14 g) active dry yeast (ideally Turbo)
  • 1 to 2 cups (0.24 to 0.47 l) water
  • 1-2 bags dried fruit (optional)
  • 1 to 2 cups (0.24 to 0.47 l) sugar
  1. 1 Bring 10 gallons (38 l) of water to a boil in a stainless steel kettle that holds 20 gallons (76 l). Allow the water to reach boiling point, with huge bubbles on the surface of the water
  • Sterilize and thoroughly clean the pot before using it. Use caution while handling a pot that looks to be unclean or discolored.
  • 2Add 2.5 lbs (1.1 kg) of cornmeal and bring to a boil for 5-7 minutes, stirring constantly. Once the water comes to a boil, add the cornmeal and stir it in with a wooden spoon until well combined. Continue stirring until the mixture becomes thick
  • 3 Reduce the heat to 150 degrees Fahrenheit (66 degrees Celsius). Reduce the heat to a low setting so that the cornmeal remains heated but is not boiling. Investing in a thermometer for the cornmeal will guarantee that it remains at the proper temperature
  • When the cornmeal is cooled, it will be more likely to interact correctly with the yeast when it is added to the batter.
  • If you cool down the cornmeal before adding it to the yeast, it will guarantee that it interacts correctly with the yeast.
  • Once the sugar and yeast have been well combined, remove the mash from the heat.
  • Once the sugar and yeast have been well mixed in, remove the mash from the heat.
  • In order to enhance taste, try a fruit mash made with bananas, apricots, and pineapple. It’s also possible to add a fruity flavor to the combination by including dried fruit mash made from blueberries, cherries, and strawberries.
  1. 1 Cover the mash with a clean cloth and store it in a cold, dark location. You may either leave the mash in the saucepan and cover it with a lid or cover it with a clean towel. Set your fermenting mash aside in a basement, cellar, or the back of a closet so it may continue to ferment. The optimal temperature is 60 degrees Fahrenheit (16 degrees Celsius).
  • Alternatively, you may pour the mash into an empty cooler and cover it with a lid to allow it to ferment.
  • 2Leave it to ferment for 4-5 days before using. The fermentation of moonshine mash created with Turbo yeast will take 4-5 days. For example, if you use bread yeast, it might take up to 1 week for the mashing to ferment. 3 Large bubbles on the surface of the mash should be avoided. If there are huge bubbles that are moving extremely slowly or that are resting on the surface of the mash after 4-5 days, remove them and discard them. As a general rule, this indicates that the mash is ready to be distilled.
  • If there are still a lot of little bubbles on the surface of the mash, it may not be ready to distill and will require further time to ferment.
  1. 1 If you have access to a copper still, distill the mash in it until it is clear. You may either rent or purchase a copper still from your local brewing supply store. You should look for a copper still that has been designed specifically for homebrewing, since they will be smaller and more compact. Then, pour the mash into the copper still and distill it according to the instructions that came with the copper still.
  • If you want to manufacture moonshine mash and other home alcoholic drinks on a regular basis, you may want to consider purchasing a copper still. A copper still holding 13 gallons (49 l) of water can cost between $900 and $1300 USD.
  • 2 Construct a makeshift still out of a pressure cooker and a copper tubing. In a pressure cooker, bring the mash to 173 degrees Fahrenheit (78 degrees Celsius). Electrical tape should be used to secure a coiled copper pipe to the vent of the pressure cooker. Run the copper coil through a pail of cold water and place the other end in a clean container to finish the process. As the mash cooks, the vapors from the pressure cooker exhaust will pass through the copper pipe and condense to form moonshine as it passes through the copper pipe. After that, the moonshine will pass through the pipe and into the clean container.
  • Because this is a home-made technique to making a copper still, you may need to keep an eye on it to verify that it is operating properly. Check to see that the mash maintains a steady temperature so that it may condense into moonshine.
  • 3Allow the mash to cool completely. Once the mash has been distilled, allow it to cool to room temperature before using. The mash should have the appearance of a transparent liquid with contaminants floating about in it. 4 Cheesecloth and a strainer can be used to filter the mash. A big plastic strainer should be placed over a large soup pot. Afterwards, put the cheesecloth over the strainer to prevent it from becoming clogged. Using your non-dominant hand, place a smaller strainer over the cheesecloth and hold it in place with your dominant hand. Maintain control of your dominant hand while scooping mashed potatoes into the smaller sieve. Elevate the smaller strainer over the bigger one to eliminate larger contaminants such as large bits of cornmeal or fruit.
  • After that, you may compress the cheesecloth to remove any minor contaminants from the mash that have remained. The cheesecloth should remove any debris that has accumulated on the surface of the mash, or on the head, allowing the mash to flow clean. Rinse the strainer many times until you have removed all of the mash. If you look in the soup pot, it should be clear and clean
  • Once the contaminants have been squeezed out of the mash, toss them in the garbage.
  • 5 Place the moonshine mash in sealed glass jars to keep it fresh. Make certain that the glass jars are sanitary and free of debris. Keep them in a cold, dark area with a tight-fitting lid. After that, you may consume moonshine mash on its own or mix it into cocktails and other beverages.
  • The mash for moonshine should last for at least 6 months to 1 year if it is kept correctly.

Create a new question

  • Question What can I do to make my moonshine mash more flavorful? If you want to flavor the bottle, you may buy seasoning or place sliced fruit, such as peaches and apples, inside it for a month or two
  • Question Is it necessary to stir the corn mash before distilling it in order to make the mash operate more effectively if there is still starch present? Yes, since the results are often better when the mash is stirred before distilling, which helps to make the mash work
  • Question Is it necessary to strain the mash before adding it to the boiler? Yes, without a doubt. In the event that any sediments are allowed to remain in the wash, they will sink to the bottom of the cooking pot and burn. If you’ve ever had a few pinto beans burn in a pot, you’ll know what type of flavor you’ll get in your booze
  • If you haven’t, you should try it. Question Is it still necessary to add yeast if I’m using self-rising meal? I’m not a big fan of “adding” yeast to recipes. Instead, I use entire feed corn that has been grown in the ground for three to four days in a canvas sack. As soon as the sprouts are done, I pour them into a small kiddie pool, smash about half of the sprouts with a rolling pin, and set them out in the sun for three to four days, or until they are totally dry, taking care to cover them at night as they dry. Due to the fact that it catches naturally occurring wild yeast from the air, this process removes the need to add yeast, resulting in a purer tasting moonshine. Question In the pressure cooker procedure, how can I pass the copper coil through a bucket of cold water to remove the impurities? Make use of a 5 gallon bucket and drill a hole in the side of the bucket at the bottom that is the same size as your tube. Place the copper coil in the bucket and pass the end of the coil through the hole you created. Connect the copper tubing at the top of the bucket to the pressure cooker using a hose clamp. Make a tight seal around the tube and through the opening you made to ensure that the bucket remains waterproof. Fill the bucket with water and ice, or leave a hose connected to the bucket running to change the water over. This water is just for the purpose of cooling down the vapor inside the copper tube, which will eventually condense into a liquid. The alcohol will drop out of the tube on the end of the tube that is connected to the bucket
  • This is normal. Question What is the best way to prepare strawberry mash? In the recipe, you may use strawberries for the cornmeal if you choose. The way my family has done things for centuries has been this way. Question What is malt extract, and how does it work? It is the sugars taken from grains during the malting process. It is possible to make dry and liquid versions of the dish, and a good recipe would explain which was intended. Question How long do you think it will take for the mash to be ready? In order to get the mash ready for your brew, it will take around 3 1/2 to 4 weeks. Question Is it necessary to discard the first batch of moonshine once the still begins to produce alcohol? According to what I’ve heard, the initial batch can be toxic. Yes, you should discard the first 60 mL of the solution. This is due to the fact that 60 mL is the required amount of time to begin boiling the wash
  • Question What is the cost of a moonshine mash still in today’s money? Depending on the size and materials utilized, prices might range from as little as $200 to as much as $8000.

More information on the replies Inquire about something There are 200 characters remaining. Include your email address so that you may be notified when this question has been resolved. Submit

Video

Thank you for submitting a suggestion for consideration!

  • The use of a home still while making moonshine puts you at danger for bacterial contamination and alcohol poisoning. Make your own decisions at your own peril. It is unlawful in the United States and many other countries to make alcoholic spirits or moonshine for personal use or for sale unless you have the right licenses and permissions in place.

Things You’ll Need

  • Stainless steel pot with a capacity of 20 gallons (76 l)
  • Stovetop or outdoor burner
  • A liquid thermometer
  • A wooden or metal spoon with a long handle
  • Using a pressure cooker A copper pipe that has been coiled
  • The use of electrical tape
  • The use of a copper still

About This Article

Summary of the Article X In a 20-gallon kettle, bring water to a boil to prepare moonshine mash. Boil for 5-7 minutes after adding the cornmeal. Then turn the heat down to low and add the sugar and yeast. Remove the pan from the heat after 5-10 minutes of stirring, or when the mixture has turned soupy. More flavor can be added by mashing dried fruit in water until it becomes more of a juice, then adding it to the mash.

Area the mash in a cold, dark place for 4-5 days to allow it to ferment. Continue reading if you want to learn how to distill and filter the mash. Did you find this overview to be helpful? The writers of this page have together authored a page that has been read 361,427 times.

Did this article help you?

Moonshine was first produced during the American Revolutionary War. The federal tax on alcoholic beverages was implemented by the government in order to raise funds for a longer war effort. Since most troops coming home were dissatisfied with a new tax, they began making their own homemade spirits immediately after fighting to free themselves from oppressive taxing British authority. This allowed them to dodge the tax while still enjoying their booze. Moonshine Mash, to be precise, is a kind of whiskey made from maize.

  • When prepared properly, moonshine might be used to treat common colds and even to fuel automobiles back in the day.
  • The harvest of corn took place during the hot summer months.
  • The whiskey would remain in barrels for lengthier periods of time while it traveled to its destination, allowing the tastes to combine, mellowing the whiskey’s color, and blending the flavors together.
  • After a while, the corn liquor evolved into bourbon.
  • The majority of maize whiskeys were produced deep in the mountains of Maryland and throughout the state of Florida.
  • You can construct a functional still to distill your own corn whiskey with the help of these supplies.

What Is Moonshine Mash?

It was during the American Revolution that moonshine first became popular. The government implemented a federal alcohol tax in order to raise funds for a protracted war effort. Since most troops coming home were dissatisfied with a new tax, they began to create their own homemade spirits immediately after fighting to free themselves from oppressive taxing British authority. This allowed them to escape the tax while still enjoying their booze, and it was a success. Moonshine Mash, to be precise, is a kind of corn whiskey.

  1. An appropriately prepared moonshine might treat a common cold and even serve as fuel in the days before electricity.
  2. During the sweltering summer months, corn was harvested by hand.
  3. The whiskey would remain in barrels for lengthier periods of time while it traveled to its destination, allowing the tastes to combine, mellowing the whiskey’s color, and blending the flavors together.
  4. Bourbon is a type of maize liquor that was created in the late 1800s.
  5. The majority of corn whiskeys were produced deep in the mountains of Maryland, all the way down to Florida, and were distilled using maize.

Copper tubing, a pressure cooker, a drill set, massive metal pots, cheesecloth, and cornmeal are all used in the production of today’s moonshines. You can assemble a functional still to distill your own corn whiskey with the help of these supplies and tools.

Moonshine Mash Recipe

The 28th of July, 2016

Notes

Six months are required for preparation.

Ingredients

  • 14 cake dry ale yeast (1 pound cornmeal
  • 5 cups granulated sugar
  • 2 gallons distilled water
  • 1 cup malt extract
  • 1 pound cornmeal

Instructions

  1. It is preferable to carry out these procedures outside. Sanitize a big, non-reactive saucepan that holds at least 5 gallons of liquid. (Copper and stainless steel are the finest materials for this)
  2. Heat the water in the saucepan to 120 degrees Fahrenheit. The cornmeal should be stirred into the boiling water until it is completely dissolved
  3. 30 minutes after adding the sugar, continue to stir the mixture while keeping the temperature at 145F. Turn the heat down to a minimum. 1 cup of hot water should be used to dissolve the yeast cake. Combine the cornmeal with the malt extract and dissolved yeast
  4. Mix well. Empty the contents of the container into another non-reactive vessel (glass or ceramic)
  5. Cheesecloth should be used to cover the vessel to keep bugs and other creatures out. Keep the mixture refrigerated for 3 days in a warm area. Distillation can begin as soon as the mixture develops a foam coating on top of itself.
You might be interested:  How Much Moonshine A Day Is Too Much?

2021 is the year in question. All items, including recipes, are owned by Maggwire and are protected by copyright. Please do not use without first obtaining written permission.

Basic Moonshine Mash Recipe

“Moonshine” is a type of alcoholic beverage made from the fermented sugar of malt grains such as oats, cornmeal, or wheat. Moonshine is a powerful alcoholic beverage with a simple formula, which has helped it to become famous over the years as something that can be created by both amateur and professional distillers. Even though there are a plethora of great (and tasty!) moonshine recipes out there, here is a basic one that can be customized to suit the items you have on hand or your personal taste preferences.

When you combine flour and water, you get a combination known as a “mash.” Mashes are also utilized in the production of other alcoholic beverages, such as whiskey.

Prior to distilling, you can strain the mash to remove any solid husks or plant debris that has accumulated.

The alcohol may be removed from the water using a distillation process, and you can enjoy your own superb handmade whiskey as a result of using either the mash or the wash.

  • “Moonshine” is a type of alcoholic beverage made from the fermented sugar of malt grains such as oats, cornmeal, or wheat, and then distilled. Moonshine is a potent alcoholic beverage with a simple formula, which has made it popular throughout the years as something that can be produced by both amateur and expert distillers alike. Even though there are a plethora of great (and tasty!) moonshine recipes to choose from, here is a simple one that may be tailored to the items you have on hand or your personal tastes. You will blend your grains with a fermenter, such as sugar or yeast, in a confined chamber to create moonshine. A “mash” is a combination made by combining flour, water, and other ingredients. Other alcoholic beverages, like as whiskey, are produced using mashes. To let the sugars in the grain to ferment into alcohol, you’ll leave your mash in its chamber for a certain length of time. The husks and plant detritus can be removed from the mash using a filter prior to distillation. The liquid that remains after removing these solid components is referred to as “wash” or “moonshine” in the industry. Either a mash or a wash may be distilled, allowing the alcohol to be separated from the water enabling you to be able to drink your own great homebrewed whiskey. Tips for making moonshine mashes include the following points:

Step 1: Research and Purchase Ingredients

“Moonshine” is a type of alcoholic beverage made from the fermented sugar of malt grains such as oats, cornmeal, or wheat and then distilled. Moonshine is a powerful alcoholic beverage with a simple formula, which has made it popular throughout the years as something that can be created by both amateur and professional distillers. Even though there are a plethora of great (and tasty!) moonshine recipes to choose from, here is a simple one that can be customized to suit the items you have on hand or your own tastes.

When you add water to the combination, you get what is known as a “mash.” Mashes are also used to make other alcoholic beverages, such as whiskey.

Before distilling, you can strain the mash to remove any solid husks or plant residue.

Either a mash or a wash can be distilled, allowing the alcohol to be separated from the water and the resultant whiskey to be enjoyed.

  • The following ingredients: 5 gallons of malt grains (rye, barley, or a mix of grains)
  • 1 packet of bread yeast
  • 10 pounds sugar (any type)
  • 5 gallons warm water

For this reason, there are no set proportions for the various components in moonshine – it may take a lot of trial and error to discover a formula that is both tasty and will work well in your moonshine still. If you want to make moonshine at home, here are some recipes to get you started. Over the years, the majority of people have measured grains in 5-gallon grain buckets, and it is typically still the most common measurement offered because stills are also measured in gallons. Some recipes ask for the use of yeast, while others demand for the use of sugar.

After a few trials, you may discover that one type of fermenter is preferable to another for your needs.

In order to manufacture moonshine, it is preferable to use distilled water, because you know that distilled water will not include any pollutants that might interfere with the fermentation process, as well as the flavor and alcohol level of your finished product.

Step 2: Prepare Mash

For this reason, there are no standardized measurements for the various ingredients in moonshine – it may take a lot of trial and error to find a recipe that is both tasty and will work well in your moonshine still. If you want to make moonshine at home, there are several recipes available on the internet. Grain buckets of 5 gallons have traditionally been used to measure grains, and this is still a common measurement used today, despite the fact that stills are also measured in gallons of liquid.

Neither is sufficient for our situation.

In order to manufacture moonshine, it is preferable to use distilled water, because you know that distilled water will not include any pollutants that might interfere with the fermentation process, as well as the flavor and alcohol level of your finished product.

Step 3: Wait for Fermentation

Because moonshine has traditionally been created in secret, there are no defined measurements for the various components in moonshine; thus, finding a formula that you enjoy and that works well in your moonshine still can be a matter of trial and error. Over the years, the majority of people have measured grains in 5-gallon grain buckets, and it is frequently still the standard measurement offered because stills are also measured in gallons. Yeast is used in certain recipes, whereas sugar is used in others.

After a few runs, you may discover that one type of fermenter is preferable to the other for your needs.

How To Make A Simple Mash For Moonshine * Moonshine How To

You may easily manufacture moonshine by following the steps in this article. The simplicity of this mash for moonshine makes it an excellent choice for a sacrifice run when breaking in a new still because it is very inexpensive to produce. A wonderful way to get started brewing corn whiskey is with this recipe, which will allow you to become acquainted with the mash-making process without breaking the bank. Some may refer to this as a “sugar wash.”

FAQ

You may easily manufacture moonshine by following the steps in this article.. Because it is so inexpensive to manufacture, this simple moonshine mash is ideal for a sacrifice run when breaking in a new still because it is so simple to prepare. A fantastic method to get started brewing corn whiskey is with this recipe. It will teach you about the process of preparing mash and will save you money in the long run. The term “sugar wash” may be appropriate.

How Much of Moonshine Will 5 Gallons of Mash Make?

On average, a 5-gallon mash recipe will generate around 3 quarts of beer with a proof of 130 percent.

Once you’ve proofed it down for consumption, the yield will be between 1 and 2 gallons of moonshine, depending on how strong you want your proof for drinking to be for consuming.

How Many Pounds of Sugar to Make 5 Gallons of Mash?

When utilizing 5 pounds of corn, a 5-gallon batch of mash uses 5 pounds of white sugar, resulting in a final product that is 15 percent alcohol and yields 5 gallons or 3 quarts.

How to Make Mash for Corn Whiskey

Try producing a very basic 80 percent maize and 20 percent malted barley mash for corn whiskey (also known as white lightning) once you’ve made this batch of simple moonshine and become comfortable with the technique. In order for the mash to be acceptable, the corn percentage must be at least 80 percent and not less. This is a basic corn whiskey mash that is frequently utilized by a large number of shiners as a go-to simple mash recipe that is quick and easy to make. In order to get the flavor of “corn whiskey” or “white lightning,” this formula must be matured in white oak barrels for at least 2 years.

Using a Grain Bill for Record Keeping

When producing mash, it is advised that you use a grain bill to keep track of your ingredients. The grain bill and comments on the mash will allow you to duplicate the exact same mash time and time again…………………………………… The grain bill will assist you in determining which mash is your preference for making corn whiskey or moonshine from scratch. Would you want to know how much grain is used in Jack Daniel’s Tennessee Whiskey production? 80 percent of the grain is maize, 12 percent rye, and 8 percent malted barley!

Fill out the form below to receive your free digital grain bill, which you can then print and use.

4 to a page is recommended!

Making a Simple Mash or Sacrifice Run

Making this batch of corn mash is an excellent first recipe, especially if you are just getting started with your still and need to do a sacrifice run for it to work properly. You can absolutely make do with only sugar, water, and yeast, and not use any corn at all! In order to keep prices cheap, we’ll be using plain white sugar and cracked corn in this batch. Afterwards, you may opt to utilize organic sugar and non-GMO maize, which is what we do here. The amount of water used in the mash has a significant impact on its final appearance.

It is possible that you may need to test the pH of your water if you are experiencing difficulties with your mash using pH strips.

If you don’t have a decent filtration system, such as the one we have in our Berkey filter, then purchasing spring water is the next best thing to do.

Simple Mash for Moonshine Video Tutorial

The use of two distinct strains of yeast in our batches is something we prefer. One is a brewer’s yeast, while the other is a basic bread yeast, and they are both useful.

The presence of two distinct strains of yeast typically results in a superior mash. That was only via experimentation that we came to this conclusion, and it is exactly what we recommend you do when you begin your trip.

Ingredients to Make a Simple Mash

  • White sugar (5 pounds), filtered water (four gallons), crushed corn (5 pounds), 1 teaspoon brewer’s yeast (1 teaspoon active bread yeast), and salt (to taste)

Materials Needed to Make a Simple Mashfor Moonshine

  • A 5-gallon bucket with a cover
  • A 5/8″ rubber grommet (optional)
  • An airlock (optional, but strongly recommended)
  • And some other supplies. To boil the water and sugar, use a stockpot or big saucepan. The sugar, water, and grain are heated using a heat source. a hydrometer, an infrared thermometer (optional), a digital scale (optional), and other tools

Steps to Make a Simple Mashfor Moonshine

  1. Measure out all of the ingredients and place them in dishes or bags. Fill the stockpot halfway with filtered water (about 2-3 liters)
  2. Preheat the oven to 165 degrees. Stir in the sugar until it is completely dissolved. Toss in the corn
  3. Remove the pan from the heat
  4. For the first hour, stir every 12 hours
  5. After that, stir every hour.

Adding the Mash to the Bucket

  1. After a one-hour period, transfer the contents to a five-gallon bucket
  2. In a large bucket, fill it halfway with hot or cold water until it reaches the desired temperature of 95-100 degrees and is about 2 inches from the brim
  3. Specific gravity should be determined using a hydrometer
  4. The reading should be recorded on a grain bill
  5. And If the reading is less than 1.5, add more sugar
  6. The typical reading is 1.5 and above (this is not essential for a sacrifice run)
  7. If the reading is greater than 1.5, add more sugar
  8. Allow for 5 minutes of resting time once the temperature hits 95-100 degrees. Stir the contents thoroughly, then insert the airlock into the grommet on the lid top and set the bucket on top of it. If you’re using an airlock, fill it all the way up to the maximum line with either moonshine or water.

Print the Simple Mash Recipe

Stir the mash every single day, at around the same time of day, according to the directions in this recipe. The fermentation process might take anywhere from 5 to 10 days depending on the circumstances. You will see continual, fairly quick blipping at the beginning of the fermentation period, and towards the conclusion of the fermentation period, you will notice sluggish blipping and finally a complete cessation of activity. If you are not utilizing an airlock, plan on starting the run at least a week before the scheduled start time.

In ConclusionHow to Make Mash for Moonshine

Using this basic method, you can learn how to produce mash for moonshine in no time. Experiment and learn from your mistakes; as you become acclimated to the procedure, it will become simpler each time. If you’re interested in learning more about the history of moonshine, make sure to check out this page. To begin, go to the websiteTTBGOV for any legal issues you may have or for answers to any legal inquiries you require. They contain a plethora of links to permissions and licenses that you may be interested in obtaining.

Shop Here

This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a method for us to make revenue by referring to Amazon.com and connected sites. Amazon Services LLC Associates Program You will not be charged any additional fees or charges as a result of utilizing the links. We only recommend products that we believe in and have personally tested. For each individual item, I will include a note stating whether or not I personally made or sold it.

Click on the Bar of Dish Soap to Visit Our Amazon Storefront!

Are you looking for things to help you on your moonshining journey? We have built a SHOP PAGE with things that we enjoy using and that we HIGHLY suggest utilizing for all aspects of the moonshine-making process. To make it simpler for you to find what you’re looking for, the items have been divided into categories. Take a look at it! Thank you for taking the time to visit and read our blog. Please take a moment to join up for our newsletter if you haven’t already done so. Thanks! We will not sell, distribute, or otherwise make use of your personal information.

Please read the footer of this page for the FBC Disclaimer, Privacy Policy, and Terms & Conditions, among other things.

1 звезда2 звезды3 звезды4 звезды5 звезд (нет голосов)
Loading...

Leave a Reply

Your email address will not be published. Required fields are marked *