What should corn be use for moonshine?

• The kind of corn for moonshine that we recommend is cracked, dry yellow corn, and yes, it’s field corn. It should be a good grade corn that is relatively clean. The corn should also be air-dried rather than gas-dried, as with air-drying the corn has not been stripped with the elements that you will need for good fermentation. The cracked corn can then be further ground to make a corn meal, which is what is used in the moonshine recipes provided.

Do you need to grind cracked corn for moonshine?

The kind of corn for moonshine that we recommend is cracked, dry yellow corn, and yes, it’s field corn. It should be a good grade corn that is relatively clean. The cracked corn can then be further ground to make a corn meal, which is what is used in the moonshine recipes provided. Make sure you get a coarse grind.

Can you use cracked corn for moonshine?

What Type of Corn Should I use in my Moonshine? Our favorite type of corn to be used in moonshine is cracked, dry yellow corn. This type of corn is considered field corn and it needs to be clean and food-grade. It is recommended to use air dried corn rather than gas dried.

How much corn do I need for 5 gallons of mash?

Ingredients: 5 gallons of water. 8.5 pounds of flaked maize.

How do you grind corn without a grinder?

Put shelled corn into the hopper on top of food processor. Grind small amounts of corn with a food processor, heavy duty blender or electric coffee mill. Pour in a small amount of corn. Use the pulse mode to grind.

How do I cook cracked corn?

Cracking corn breaks kernels down into smaller pieces that are easier for birds and other animals to digest. The corn needs to be shucked and dried to prepare it for grinding. Then, run it through a grain mill or meat grinder at a low grind setting.

What temperature do you mash cracked corn?

Heat water to 165 °F. Turn off heat source when you reach 165 °F and immediately stir in 8.5 pounds of Flaked Corn Maize. Stir mixture continuously for 7 minutes. Check temperature and stir mixture for 30 seconds every 5 minutes until the temperature cools to 152 °F.

Can humans eat cracked corn?

Deer Corn, Cracked Corn, and Whole Corn are commonly found at feed stores like North 40, hunting stores such as Cabellas, and of course superstores like Walmart. Not much, in fact you are perfectly ok to eat the corn grain straight from the bag; however it is a little hard (corn nuts anyone).

How do you Gelatinize cracked corn?

To make corn fermentable, the starch it contains must first be gelatinized by being cooked in water between 158–167 °F (62–75 °C) or higher for about 30 minutes. Since we want to be certain that gelatinization is complete, the simplest way to do this is to cook the corn addition in boiling water.

What is Kibbled corn?

Kibbled maize is cracked maize in granulated form. High in carbohydrate and oil, its small size makes it easily digestible and therefore ideal for smaller species.

What is the difference between flaked corn and cracked corn?

Cracked corn is just some size of corn grits. You would need to cook them or do an American Cereal Mash to gelatinize the starch. Flaked corn comes pre-gelatizined so you can put it directly into a standard infusion mash. Flaked wheat is also pre-gelatinized and can put it directly into a standard infusion mash.

What kind of water do you use to cut moonshine?

One of the most important tips I can give to moonshiners is to always use distilled water for making moonshine wash. It’s no secret that tap water contains a plethora of chemicals, some of which includes chlorine, chlorate, bromate and fluoride.

How do you speed up the fermentation of moonshine?

So, say you brew 5 gallons of beer day one, aerate and pitch an adequate yeast pitch for that size beer, then put 5 more gallons on top of that 12-24 hours later you will drastically speed up fermentation time. Just be sure to aerate each batch well.

Can you make alcohol with just water sugar and yeast?

The key ingredient, sugar, is converted into alcohol by the process of fermentation by the second ingredient, yeast. Homemade liquor can be made easily if you have sugar, water (to form a sugar solution) and baking yeast.

Traditional Cracked Corn Moonshine Recipe

Our cracked corn moonshine recipe is the perfect approach to make whiskey the old-fashioned manner. Is it your goal to discover a classic moonshine recipe so that you may learn how to brew a delectable whiskey? You don’t have to search much farther. For those looking to capture the original flavor of a traditional shine, we have a fantastic cracked corn moonshine recipe that is sure to please. Despite the fact that modern moonshine can be created from nearly anything (even bananas! ), many moonshiners are interested in learning the more traditional moonshine recipes that their forefathers would have used.

The Moonshine Tradition

With our cracked corn moonshine recipe, you can make whiskey the traditional manner. Want to learn how to manufacture great whiskey from scratch? Are you looking for a classic moonshine recipe to use? Look no farther, for you’ve found it. For those looking to capture the original flavor of a traditional shine, we have a fantastic cracked corn moonshine recipe for you to try. Even though modern moonshine may be created out of virtually anything (even bananas! ), many moonshiners are interested in learning the more traditional recipes for moonshine that their forefathers and foremothers would have used.

Is Moonshine Illegal?

Inevitably, big government intervened (before the United States of America was even a country!) and decided to tax spirits as a means of defraying the costs of the Revolutionary War (thanks to Alexander Hamilton), and so moonshining was made illegal. The act of distilling one’s own spirits is still considered illegal in many parts of the world and in the United States of America. There are, however, safeguards you may take to keep yourself and your craft safe. Check out Is Moonshine Illegal in the United States?

Many moonshine recipes ask for corn, but if you are not a seasoned shiner, this is not nearly enough information to get you started.

Is corn used for animal feed?

There are a lot of recipes out there that appear to be created solely for experienced shiners and leave out all of the vital information.

What Type of Corn Should I use in my Moonshine?

Inevitably, big government intervened (before the United States of America was even a country!) and decided to tax spirits as a means of recouping the costs of the Revolutionary War (courtesy to Alexander Hamilton), and so moonshining was made illegal. The act of distilling one’s own spirits is still regarded illegal in many parts of the world including in the United States of America today. You can protect yourself and your craft, though, if you take the proper precautions. See Is Moonshine Illegal in the United States?

For further information, please see the following link: A lot of moonshine recipes ask for maize, but if you aren’t a veteran shiner, this isn’t nearly enough information.

Should maize be fed to animals as a feed? Corn that is flavored with sugar? Many of the recipes available online appear to be created just for experienced shiners, and often omit vital information. So let’s come back to the fundamentals of the situation:

Moonshine: a Three-Step Process

It takes a lot of effort to make moonshine from scratch. However, at How to Moonshine, we feel that it is a significant tradition that should be preserved in its current form. We like to simplify more complex recipes into a three-step process: mash, fermentation, and distillation (see diagram below). Manufacturing a mash is the first stage in the process of making moonshine. A moonshine mash is created by combining your moonshine components and heating them to a high temperature in order to turn your mash to alcohol.

It is necessary to heat up and cook your mash in order for this procedure to be completed successfully.

Equipment Needed for Making a Mash

When you are preparing a huge recipe such as this, you will need a lot of equipment! Having specialized equipment for creating your mash is highly recommended if you are producing a large batch of this recipe, as we are. Consider the fact that you are unlikely to have a pot large enough to accommodate this recipe, or a spoon long enough to effectively stir your components. By investing in the necessary equipment, you can make it much easier to properly prepare your mash.

For making this mash you will need:

Our recommendations are as follows: All-Purpose Stainless Steel Stockpot with Steam and Boil Basket, Bayou Classic 1144 44-Quart with Steam and Boil BasketParlynies Stainless Steel Stockpot

A Long Spoon

HIC Brands that Cook 97050 15-Inch Helen Chen’s Asian Kitchen Bamboo Kitchen Spoon is a product that we suggest. Our favorite features of this spoon are its length and the fact that it is made entirely of natural materials. Selecting the 15-inch option will ensure that you have the length you require to reach the bottom of the ladder.

A Cooking Thermometer

Temperature is critical in the production of your mash (and moonshine), thus we propose the following: The HABOR Digital Instant Read Meat Thermometer measures the internal temperature of meat. This mash will only be successful if all of the equipment and the surrounding area are thoroughly cleaned before you begin. This is the greatest technique to follow in order to eliminate any potential contamination that might negatively impact your final product.

Once you have clean equipment, it is time to get started.

Pour six gallons of filtered water into a big saucepan and bring it to a temperature of 165°F. Once the temperature reaches 165°F, remove the pan from the heat and add the cracked corn. The reason why you need to grind your corn is because it has to be processed in order to release its starch. Once you’ve added your corn, give it a good stir every 5 minutes or so for around 20 seconds. Keep an eye on the temperature. Once the temperature has dropped to 150°F, the crushed barley can be added. Stir well to ensure that everything is well-incorporated.

It is time to turn off the heat once you have added your barley and mixed your mash well. The goal at this stage is for our mash to get down to room temperature, or 70°F.

How to Cool your Mash

Cooling your mash may be accomplished in a variety of ways. Some moonshiners prefer to utilize an immersion chiller to swiftly cool their mash, which can be more efficient. The Homebrew Stuff Immersion Chiller is a good choice if you want to make a significant investment in a chiller. When working with a big pot, such as the one required for this recipe, it is possible to submerge the mash pot in ice water to bring the temperature down. You may also simply wait if you don’t want to.

Strain your Mash

This procedure does not necessitate the straining of your mashed potatoes. If our mash has cooled, we find it simpler to strain it through a cheesecloth and with clean hands (to squeeze it out) once it has been allowed to chill. Alternately, you may strain your mash once it has finished fermenting using the same process.

Pitching the Yeast

When it comes to creating moonshine, temperature is quite crucial. Before adding the yeast, you must ensure that the mash has cooled to 70 degrees Fahrenheit. In addition to the proper temperature, your mash need oxygen in order to begin the fermentation process. To aerate your mash when working with a large recipe like this one, you will need to pour it between your fermentation bucket and your pot roughly 5-10 times. This mechanism will offer the oxygen that the yeast requires in order to do its function.

Attach an airtight lid and an airlock to the container.

For around two days before distillation, keep an eye on your airlock for any signs of activity ceasing.

Cracked Corn Moonshine Recipe – Homesteader’s Guide # SimplySurvival

When it comes to creating moonshine, temperature is critical. It’s important to wait until the mash has cooled to 70°F before adding the yeast. The fermentation process requires oxygen in addition to the proper temperature for your mash. To aerate your mash when working with a large recipe like this, you will need to pour it between your fermentation bucket and your pot around 5-10 times. This mechanism will offer the oxygen that the yeast requires in order to do its function. As soon as you’ve finished aerating your mash (finish with the mash in your fermentation bucket), add your yeast.

Allow it to ferment for around 10-14 days in a temperature-controlled environment between 70°F and 75°F.

Is It Even Legal?

A small deal of misunderstanding and myth-mongering is circulating, but the main line is straightforward. A license to distill spirits is required if you want to create them at home without breaking the law. Even if it is solely for personal use. I find it odd because it is completely lawful in most jurisdictions to manufacture small amounts of wine or beer for personal consumption without having to pay taxes or obtain a license.

However, things are as they are. While it is permissible to purchase distilling equipment for “legal purposes,” if you want to utilize our moonshine recipe, you will need to seek for a special permission or relocate to a nation with more lenient home brewing legislation.

Cracked Corn Moonshine Recipe – Ingredients and Equipment

• A recipe calls for 6 gallons of water, 8 pounds of cracked corn milled fine, 1.5 pounds of malted barley, optional sugar, and one package of yeast (typically 11 g). Mash pot
• Spare bucket for aeration
• Heat source (electric or propane flame)
• Thermometer. Long spoon, cheesecloth, auto-siphon, fermentation bucket, hydrometer, and airlock are all useful tools. Still for making moonshine

How to Do It

Water, 8 pounds crushed broken corn, 1.5 pounds malted barley, sugar (optional), one package of yeast (typically 11g), and a few more ingredients. Mash pot; spare bucket for aeration; heat source (electric or propane flame); thermometer Long spoon, cheesecloth, auto-siphon, fermentation bucket, hydrometer, and airlock are all useful tools for the fermentation process. It’s a still for making moonshine.

Step 2. Fermentation

After you’ve prepared your mash, it’s time to start the fermentation process. In a separate container, place the mesh into your fermentation bucket. To view the current price on Amazon, please click here. Make use of your hydrometer to obtain particular gravity values. A hydrometer is a device that measures the relative density of liquids in a given volume. It enables you to assess the amount of alcohol present in your mash mixture. To view the current price on Amazon, please click here. It is also the most precise method of determining when fermentation has been completed.

• Seal your fermentation bucket with an airlock, and you’ve completed the majority of your work.
• The yeast will now take control of the situation.
• Lower temperatures may result in “cleaner” fermentation, with fewer losses and less volatile acids and alcohols, but they are not advised since they increase the risk of contamination.
• In general, the safest temperatures are between 70 and 75 degrees Fahrenheit, and it takes between 10 and 14 days to turn all of the sugar into alcohol.
• During fermentation, you should avoid opening the bucket and exposing yourself to the possibility of infection.
• Bubbles should begin to develop within a short period of time.
• After around two weeks, the bubbling will begin to slow down and then cease altogether.
• You may now utilize your hydrometer to validate your suspicions.
• You now have your alcohol, but it is still not moonshine.

Step 3. Distilling

The distillation process is the most thrilling element of the entire operation. There’s a little bit of science and art to it. Personal experience is also quite significant, thus I recommend that you take notes on every occasion that you do it. To view the current price on Amazon, please click here. Regardless, prepare your still and, like before, use a cheesecloth or an auto-siphon to transport the mashed potatoes into the still. Increase the temperature gradually. The production of your still will begin as soon as the temperature reaches 150 degrees Fahrenheit.

• Each distillation run is divided into four distinct segments.
• The first substances to evaporate are toxic methanol and volatile alcohols.
• Simply collect it and dispose of it as soon as possible.
• The heads portion has a horrible taste and smells like acetone or solvent, which is not pleasant.
• Despite the fact that some distilleries include it to the second distillation cycle, you may skip it.
• It will have a smooth and sweet flavor.

At long last, the flavor changes once again, the sweetness disappears, and you can tell that you are distilling the tails. That’s all there is to it. Moonshine is sweet and soft, and you’ll need to distill it again to make it sour and stronger, but the method will be the same as it was before.

Conclusion

Making moonshine is a rather simple process. It is possible to achieve a satisfactory outcome on your first attempt. Learning the complexities of the process, on the other hand, requires talent and experience. Perfect timing and skill are more important than following a recipe. Aside from that, anyone may simply follow the instructions and produce great moonshine. In any case, if you ever decide to go on this journey, you will have a beginning formula as well as a fundamental grasp of the process.

Corn Whiskey Mash Recipe

We just prepared a corn whiskey mash and filmed the process so that others may see how we did it. Before we get started, it’s important to remember that producing mash is legal in the United States. It’s the same as producing beer, which is permitted in 48 states throughout the United States. Without a federal fuel-alcohol plant permit and the necessary state and municipal approvals, distilling alcohol is not permitted in most jurisdictions in the United States. Our distillation apparatus is intended solely for legal reasons, and the information contained in this paper is intended solely for educational purposes.

• The following is a step-by-step corn whiskey moonshine recipe that is accompanied with photographs and illustrations.
• Check out our page on How to Make Moonshine Mash for a more recent version of this recipe.
• We produced, stored, and utilized this alcohol in line with the rules of the Therapeutic Goods Administration.
• A commercial distillery would most likely create maize whiskey in the manner described below.

Mashing Equipment

• First and foremost, creating corn whiskey mash is a straightforward process. Although less equipment might be utilized, possessing the following essential equipment will make the job a lot simpler in the long run. To start distilling, all a distiller needs is a big pot for mashing, a wort chiller for chilling liquid, a brewers thermometer, cheesecloth, a plastic funnel, and an extra plastic bucket for aerating the finished product. Check out our guide on appropriate distillation equipment for more information.

Ingredients

• The first step is to make corn whiskey mash, which is a very straightforward process. Although less equipment might be utilized, possessing the following essentials will make the job much simpler. To start distilling, all a distiller needs is a big pot for mashing, a wort chiller for chilling liquid, a brewers thermometer, cheesecloth, a plastic funnel, and an extra plastic bucket for aerating the mixture. Remember to read our distillation equipment guide for recommendations

• Crushed corn (also known as flaked maize)
• 2 lbs. crushed malted barley*
• 6.5 gallons of water
• 1 packet of bread yeast (Fleischmann’s Active Dry works well)
• 1 cup of sugar
• 1 cup of flour

*Please keep in mind that the barley must be malted in order for the recipe to work (more on this below).

Procedure

• To get this temperature, we heated 6.5 liters of water to around 165 degrees Fahrenheit. We turned off the heat as soon as the desired temperature was attained. It won’t be required for quite some time. Afterwards, we added all of the crushed corn to the boiling water and stirred for around 3 to 5 minutes. After that, we stirred for 5-10 seconds every 5 minutes for the next 5 minutes. This is the beginning of our mashup

• As the corn is agitated, it will develop into a gel-like substance. We were not frightened when this occurred because it is a totally common occurrence. The maize is being broken down and starch is being released, resulting in a thickening of the mixture as it breaks down. When the barley is added and the mashing process begins, the mixture will become noticeably thinner.

• While stirring, we kept an eye on the temperature. Once the temperature had cooled to 152 degrees, we added the malted barley and stirred for 1-2 minutes until it was dissolved. After the mixture had been mixed, we covered it and let it “rest” (sit) for 90 minutes.

• The temperature was constantly being checked as we swirled everything together. At 152 degrees, we put the malted barley in and stirred it for 1-2 minutes, until it was completely dissolved. After the mixture had been mixed, it was covered and allowed to “rest” (sit) for 90 minutes.

• When we were waiting for the mash to finish, we prepared a “yeast starter” by rehydrating our yeast in a glass of water. For this recipe, we used 2 packets of active dry bread yeast with 1/2 cup of 110 degrees F water and 1 teaspoon of sugar
• The result was a light, fluffy loaf of bread.

• By completing this step, we were able to confirm that the yeast was functioning properly (if the yeast is functioning properly, a “yeast cake” would form and expand on top of the water). This phase also provides the yeast with an opportunity to obtain a “head start.” Once the yeast is introduced to the mash, it will be able to start fermenting at a quick rate almost immediately. Because of this, there is less danger of the mash becoming contaminated by ambient germs.

• Having allowed the mash to rest for 90 minutes, we needed to chill it to a temperature appropriate for adding yeast. Temperatures are usually in the range of 70 degrees at this time. A distiller can either use an immersion chiller to quickly cool the mash or just let it to sit for many hours to cool the mash. In order to separate the particles from the liquids, we passed the mash through a cheesecloth (or any fine strainer) once it had cooled completely.

• Having let the mash to cool for 90 minutes, we needed to bring the temperature down to a safe level for adding the yeast. This is usually somewhere in the vicinity of 70 degrees Fahrenheit or above. An immersion chiller may be used to quickly cool a mash, or a distiller can just allow the mash to rest for many hours to allow it to cool. In order to separate the particles from the liquids, we passed the mash through a cheesecloth (or any fine strainer) once it had cooled

• As soon as it was cold enough to handle and after the grain fines were removed, we aerated the mash by pouring it back and forth between two clean buckets. The aeration was done forcefully enough that froth and bubbles formed (which is an indication of effective aeration), but not too aggressively. Approximately 10-15 times, we poured the liquid back and forth. Following aeration, we measured the specific gravity of the solution by filling a test tube with water and using a hydrometer. If a distiller wants to perform this in another method, he or she can drop some of the product onto a refractometer collecting plate and measure the refractometer reading.

• The importance of aeration cannot be overstated. Yeast require oxygen in order to thrive. Without adequate aeration, fermentation may fail and the yeast would be unable to function. Aerate
• The specific gravity value is used to calculate the amount of beginning alcohol that may be present. Essentially, it allows one to predict how much alcohol will be present in the wash assuming all goes according to plan throughout the fermentation process. After fermentation is complete, a second reading will be done to ascertain the true alcohol level of the rinse. This value can only be calculated if both measurements are taken.

• After aerating the mash and measuring the specific gravity, we added the full contents of our yeast starter to the mash and blended everything together. After that, we transported our mash to a fermentation vessel to ferment.

• Afterwards, we aerated the mash and measured the specific gravity, at which point we added the whole contents of our yeast starter. At long last, we transported our mash to a fermentation tank.

• The fermentation process is the final stage in the mashing process. As soon as we put the mash to the fermenter, we secured it with an airlock and allowed it to ferment for at least 1 week. It is possible for a distiller to leave this sitting for up to three weeks. As long as it’s bubbling, it’s still in the process of fermenting. Until there were no more bubbles to be seen, we left it alone.

• We created our own airlock out of a rubber stopper, some transparent plastic tubing, and a few zip ties to keep the water out. A few times we looped it and filled the bottom of some of the loops with sanitizing solution, forcing air to bubble out while allowing no air to come in
• This worked well for us.

Distillation

The airlock we created was comprised of three components: a rubber stopper, clear plastic tubing and zip ties. A few times we looped it and filled the bottom of some of the loops with sanitizing solution, forcing air to bubble out while allowing no air to enter; this worked well.

Home Made Corn Mash Moonshine Recipe

Possibly not so much as soon as you take a good, wholesome taste of the fruits of your labor! For those looking for a truly vintage moonshine experience, this mash recipe is as close to the real thing as it gets. Just make sure you’re using high-quality corn seeds for the mash, and that they’re well-ground (but not into flour, mind you). Even rookie runners should be able to get excellent results with this moonshine recipe because both the fermentation and distillation procedures should be quite straightforward.

We have made use of red star yeast in this recipe.

The underlying concept is that starch turns to sugar, and that sugar should be transformed to liquor to make it possible. Amylase Enzymeis required for grain mulching because grain needs to be broken down before it can be used. Sale Red Star Active Dry Yeast, 2 Pound Pouch, Red Star Active Dry Yeast

• Contains 2 pounds of active dry yeast from one of the most well-known brands in the world
• Comes in a heavy-duty vacuum-packed pouch. As active dry yeast, it is best suited for usage at temperatures between 110 and 115 degrees Fahrenheit. Active Dry Yeast is intended for use in the production of yeast-leavened bread and dough. From the well-known Red Star company

Best Equipment for this Recipe

Given that this mash does not require a high proof, even if you only have a little pot, you should still get excellent results. In the event that this is your first time out, be certain that you have all of the necessary equipment in order to guarantee that everything goes off without a hitch.

Fermentation Jar

It goes without saying that you’ll need to ferment your mash. Sure, mason jars and the same bucket you use for oil changes in your automobile may be sufficient for the time being to keep things running smoothly. However, if you want to shine as brightly as the big boys, you must put in the necessary effort. The reason we use glass carboys is that, despite their weight, they are the most hygienic alternative. This is our favorite glass fermenter, and it is as follows: Old mash ingredients might become lodged in minor scratches in plastic buckets/containers, necessitating the replacement of old ingredients with fresh ones on a regular basis.

Not to mention airlocks, which you should always have a good supply of on hand for emergency situations.

Auto-Siphon

In order to ferment your mash, you’ll need to do a few things. You may make do for now with mason jars and the same bucket you use for oil changes in your automobile. To shine like the pros, you must, nevertheless, put up some considerable effort. The reason we use glass carboys is that, despite their weight, they are the most hygienic choice. We have a favorite glass fermenter that looks like this: In plastic buckets/containers, old mash components can become trapped in minor scratches and must be replaced with fresh ones on a regular basis.

Not to mention airlocks, which you should always have a good supply of on hand for emergency situations..

1. To make mixing easier, heat the water to around 100 degrees Fahrenheit. In the fermentation bucket, combine the sugar, maize, and water by thoroughly swirling the mixture with a spoon for a couple of minutes
2. Repeat the process. Place the yeast in the bucket and cover it with the lid. Placing the airlock in the appropriate aperture and ensuring that the seal is airtight is critical. Allow for thorough fermentation of the mash, which should take around 2 weeks in total. Once the bubbling in the airlock has stopped, continue to leave for another 2-3 days. Use a siphon tube and (optional) filter to open the fermenter and rack the wash (filter out any particles and sediment) out of it. Place the washed clothes in the boiler of your still and turn it on to heat them up.

In order to help in the mixing process, heat the water to around 100F. By thoroughly swirling the mixture with a spoon for a couple of minutes, you can get the sugar, corn, and water into the fermentation bucket. Then cover the bucket with its lid and let aside for a few hours. Placing the airlock in the appropriate aperture and ensuring that the seal is airtight is essential. It should take around 2 weeks for the fermented mash to reach its full potential. Wait an extra 2-3 days after the bubbling in the airlock has stopped.

Place the washed clothes in the boiler of your still and turn it on to heat them.

Share This Recipe With Your Friends!

Although most home brewers are intimidated by the prospect of making their own corn mash, the process is actually pretty straightforward.

Not to mention that the finished result will be one of the greatest tasting corn whiskeys you’ve ever tasted in your life. Using a straightforward step-by-step approach that everyone can understand, the following article will teach you how to prepare corn mash from scratch.

Mashing Equipment

To the majority of home brewers, making a corn mash appears to be a daunting task, but it is actually pretty straightforward. Not to mention that the finished result will be one of the greatest tasting corn whiskeys you’ve ever tasted in your life! Using a straightforward step-by-step structure that anybody can understand, the following article will teach you how to prepare corn mash from scratch.

Ingredients

Next, let’s double-check that you have all of the materials. You will require the following items:

• 1 package of bread yeast from your local grocery store
• 8.5 lbs. of crushed corn (if you get it from a feed store, make sure it doesn’t have any additives in it)
• 5 gallons spring water (you can use tap water, but let it sit for a day or two to remove chlorine)
• 2 lbs. of crushed malted barley (barley must be malted or this won’t work)
• Additionally, if you have access to Generic Distillers Yeast, you may use it.

Procedure – 11 Easy Steps To Make Corn Mash

• Step 1– Bring 5 gallons of water to 165 degrees Fahrenheit and turn off the heat. Fill the water halfway with crushed maize (about 8.5 pounds). 3. Stir for 2- 3 minutes, then stir once every 5 minutes until the temperature has dropped to 152 degrees Fahrenheit

• You’ll see that the corn begins to gel as time passes. Those starches that are released from the corn are responsible for this phenomenon.

• Once the corn begins to gel, you will notice it. Specifically, the starches released from the corn are to blame for this.

You will notice that the corn has begun to gel. Those starches that are being released from the corn are responsible for this.

• Step 7– Hold off on drinking that beer just yet since you’re not quite finished. It might be wise to use this time to get a “Yeast Starter” cooking while you are waiting. The Starter will expedite the fermentation process and assist you in producing high-quality corn whiskey that will be delicious to drink. So I won’t go into detail on how to build a Yeast starter as I previously covered it in my previous post, “4 Steps to Making an Easy Yeast Starter.”

• Step 8: Straining Corn Mash Through a CheeseclothOnce the Corn Mash has cooled to a temperature that can be handled, strain the Mash through a cheesecloth to remove the solids. Step 9-Aerate the mixture by pouring it back and forth between two buckets many times. Alternatively, you may pour it into a carboy and shake briskly for a minute or so. Using a hydrometer, determine the Specific Gravity of the Mash at this point in time. It is necessary to know how much alcohol will be present in the wash when fermentation is complete in order to calculate specific gravity.

• Step 10– Check the temperature to ensure that it is between 75 and 85 degrees Fahrenheit. As soon as it is between these two ranges, put your Yeast Starter and corn mash to your primary fermenter pail or carboy, and stir well. Airlock should be installed at this point, and the yeast should be allowed to operate. The air lock should begin to emit bubbles after a few hours, indicating that the process is complete. Fermentation will take between one and two weeks! When the bubbling has stopped, it is ready to be distilled.

Distillation

Please see the How to Distill – 101 article and video if you are interested in learning how to transform your corn wash into corn whiskey moonshine.

How to Make the Smoothest Mash Recipe for Moonshine

I’ve been producing moonshine for more than two decades and have experimented with a variety of formulas and measuring techniques. In spite of the fact that I have tried with every sort of ingredient possible, the smoothest mash I have ever prepared is so basic that it will take your breath away. The following dish is also suitable for those who are new to cooking. This recipe does not rely on complicated components to break down starch chains into sugars, as is the case with many others. This dish is quite easy to make.

The key weapon is sweet feed, as you may have guessed.

Enjoy!

Why is the mash recipe so important?

When it comes to the flavor of the whiskey, the mash is by far the most crucial thing to consider. Consider the following scenario: you go on a whiskey run and the whiskey turns out to be 110 proof. This indicates that it contains 55 percent alcohol. As a result, the remaining 45 percent is made up of the water that came from the mash. As a result, the final product is significantly influenced by the mash. The entire amount of the mash produced by this recipe, including the grains, is 30 gallons.

Smoothest Mash Recipe Ingredients

• Sugar, yeast, and water are used in the preparation of sweet feed (unpelletized). Are you looking for more mashed potatoes recipes? Obtain 20 free moonshine recipes delivered directly to your inbox! Take advantage of 20 tried-and-true recipes that are simple, tasty, and time-saving. After you’ve gathered your supplies, you’ll need to figure out how many gallons you’ll need to make your batch. Using varied size recipes for mash batches, I’ve constructed the chart below, which is measured in gallons. The batch size may be changed easily by simply inserting different values from the chart into the following instructions:

Moonshine Batch Sizing Table

Gallons	Grains (gallons)	Yeast (Tbsp)	Sugar (lbs)
30	5	6	25
20	3.5	4	16
10	2	2	8
5	1	1	4
2.5	.5	.5	2

Step-By-Step Guide To Making Moonshine

When you crack the grains, you are softening them and allowing the flavor to come through. To make the stock, fill a big pot with five gallons of water (an outside turkey fryer pot works well). Bring this water to a temperature of 160 degrees. I make use of a gas stove that I keep outside. The mash will be cooked in a large saucepan. In particular, I recommend the Bayou Classics propane burner since it is quite sturdy and features an adjustable regulator for temperature control. It’s the only one I use at the moment.

• Wait for the water to reach its proper temperature before mixing one part sweet feed to two parts corn in a 5 gallon bucket until it is completely full.
• Using the above example, a 5 gallon bucket of grains would contain 66 percent maize (3.3 gallons) and 33 percent sweet feed (1.66 gallons).
• I use a one-gallon scoop to make the process go more quickly.
• Now is the time to add the grains and lower the heat to maintain 160 degrees for 45 minutes.
• 1 part sweet feed to 2 parts chopped corn is an excellent ratio.
• Throughout this eBook, I will guide you step-by-step through the whole process, from selecting equipment to sipping your very own homebrewed whiskey.

I’ve included my time-tested, beginner-friendly corn whiskey recipe, which I devised to be exceedingly easy and very smooth, and it’s included as well. This eBook is now available for purchase.

Step Two: Mix the Mash

Pour the cracked grains into a 30-gallon container and whisk in 25 pounds of sugar until well combined. When the sugar has completely dissolved, add 15 to 20 gallons of cold water at a time until the mash mix reaches a total volume of 30 gallons (by volume). Sweet feed and yeast pack are added to chopped corn. After hearing from a number of my readers that it can be difficult to get unpelletized sweet feed for this recipe, I developed an ingredients package that you can purchase that has everything you need to mash a 10 gallon batch.

Step Three: Add the Yeast

When the temperature of the mash has cooled to the temperature advised by the yeast manufacturer, you can proceed to add the yeast to it. I’ve discovered that 1 tablespoon of yeast per 5 gallons of mash produces satisfactory results. The greatest results will be obtained with distiller’s yeast. I’ve discovered that the Red Star brand works really well and is extremely reasonably priced. Red Star Yeast is difficult to come by in your area, but you can order it from Amazonhere.

Step Four: Let the Mash Ferment

All that remains is for you to wait. Allow for approximately a week for the mash to do its thing. It is finished until you can no longer see the bubbling that is created by the yeast as it releases carbon dioxide from the mash. Once the fermentation process is complete, filter the liquid to remove the spent particles and transfer the liquid to your still for further processing. The wash is the name given to the last liquid. The only thing you want to do is put the wash into the still. That’s all there is to it!

In case you’re interested in making your own DIY project on a budget, I’ve created a two-part video lesson that you can watch: A prefabricated still kit for home usage, like as this one from Vanell, is also available on Amazon.

Summary

I hope you have liked this post and that you will find the recipe to be simple and enjoyable to prepare! You will thoroughly love the exceptionally smooth whiskey that is produced by this mash. Just keep in mind that moonshine production is both an art and a science, and your first batch will almost certainly not be flawless, and your second batch will almost certainly not be either. Nonetheless, if you persist with it and master the intricacies of your still, you will soon become an expert in the art of moonshining production!

Good luck with your stilling!

Cracked Corn Moonshine

Making moonshine and laying out a strategy begins on Friday night with a trip to the local feed shop to pick up a bag of cracked corn for the weekend. You will require around a ten-pound bag. Moonshine Corn Liquor is a type of alcoholic beverage made from corn “Moonshine is the caption for the image data-image-caption=” data-medium-file=” data-large-file=” src=data-medium-file=” data-large-file=”” alt=”Moonshine” The following sizes are specified: (max-width: 225px) 100vw, 225px”> srcset=”225w,450w,113w” sizes=”(max-width: 225px) 100vw, 225px”> Moonshine I also like to blend it with some flacked corn maize to give it a different flavor.

So I’m going to use around 8 pounds.

All of these items can be purchased at a specialty brewers store.

a 6-gallon bucket Bucket for fermenting grains “data-image-caption=” Fermentation bucket” data-image-caption=” Fermentation bucket” data-medium-file=” data-large-file=” src=data-medium-file=” data-large-file=”” 6 Gallon Fermentation Bucket (alt=”Fermentation bucket”>6 Gallon Fermentation Bucket Other equipment required: one turkey fryer, two for one here you can use the 30 qt pot to heat up your mash and then later on you can use its propane BTU burner, two or three propane tanks, and a reflux column still if you want to be fancy.

• It is necessary to have a thermometer so that you can determine the exact time to make your cuts.
• There are a number of comprehensive blueprints available on the internet.
• I’ve also included links to various things in the section below, so you can quickly purchase them through Amazon.
• Your support is greatly appreciated!
• Follow the instructions in the booklet that came with your still and proceed at your own risk when making moonshine.
• As a result, you will want to put a mirror above it to make it easier to see the temps.
• One to allow the water to trickle into your still and another to allow the water to be released.
• Which is a flammable substance.

Garden hose with a lot of strength “data-image-caption=”Heavy duty Garden Hose” data-medium-file=” data-large-file=” src=” alt=”Garden Hose”>Airlocks Brewer fermentations” data-large-file=” src=” alt=”Garden Hose”>Airlocks Brewer fermentations” data-image-caption=”Airlocks” data-image-caption=”Airlocks” data-medium-file=” data-large-file=” src=” alt=”Airlocks”>32 oz wide Mouth Mason Jars” data-image-caption=” 32 oz wide Mouth Mason Jars” data-large-file=” src=” alt=”Airlocks”>32 oz wide Mouth Mason Jars” data-medium-file=” data-large-file=” src=” alt=”Mason Jars” data-large-file=” src=” alt=”Mason Jars” “Recipe for Moonshine made from cracked corn

• Cracked corn (3.5 pounds), corn maize (3.5 pounds), sugar (seven pounds), filtered water (five gallons), Champagne yeast (one package), and tomato paste (one can, unsalted) are all needed.

Instructions: Make it worth your while by making two batches and ensuring that all of your equipment is thoroughly cleaned.

1. Heat your 5 gallons of filtered water in a big saucepan until it reaches 100 degrees Fahrenheit. In a 6-gallon fermenting bucket, combine hot water, broken corn, corn maize, sugar, champagne yeast, and tomato paste
2. Stir until well combined. Place the lid on top of the container, followed by the rubber plug and half filled airlock. Place your bucket in a quiet location and wait for the magic to unfold. Your airlocks will begin to bubble, and when the bubbling has calmed down, you will know that your beer is on the verge of being fully fermented. Cracked Corn Moonshine is made once the bubbling has stopped, which takes around 2 weeks. The mash is separated by draining the liquids using a siphon, which is the beginning of the process of manufacturing Cracked Corn Moonshine. Pour the liquids into your still and set it aside. Prepare the place where you will be cooking before you begin.

Okay, so making moonshine may take you two days to complete. As a result, you will want 2-3 5 pound propane tanks as well as a well-ventilated place that is preferable away from the wind. Taking a sativa leaf and transforming it into artwork” data-image-caption=” Cannabis leaves ” data-image-caption=” data-medium-file=” data-large-file=” src=data-medium-file=” data-large-file=”” alt=”Cannabis leaves” title=”Cannabis leaves” description=”Cannabis leaves” title=”Cannabis leaves” alt=”Cannabis leaves” description=”Cannabis leaves” description=”Cannabis leaves” description=”Cannabis leaves” description=”Cannabis leaves” description=”Cannabis leaves” description=”Cannabis leaves” description=”Cannabis leaves” description=”Cannabis leaves” description=”Cannabis leaves” description=”Cannabis leaves” description=”Cannabis leaves” description 100vw, 300px” sizes=”(max-width: 300px) 300w, 600w, 150w” srcset=” 300w, 600w, 150w” sizes=”(max-width: 300px) 300w, 600w”> Cannabis leaves Sincerely, yours truly Mason The cuts may be found on the Heads or Tails Blog by J.A.R.

Head

Heads or Tails

2021-04-27 How to Make a Simple Mash for Moonshine (with Pictures). All of the components should be measured into dishes or bags. Fill the stockpot halfway with filtered water (about 2-3 liters). Preheat the oven to 165 degrees… Frommoonshine.farmhouse-bc.com 5/5CategoryBeverage

HOW TO MAKE SOUR MASH – CLAWHAMMER SUPPLY

Recipe for Sour Mash. The maize in this recipe is utilized mostly for flavoring purposes, while the sugar will supply the majority of the energy required for fermentation. This is a multi-step procedure that necessitates the involvement of a… Fromclawhammersupply.com 4.5 out of 5 (71)

CORN WHISKEY MASH RECIPE – CLAWHAMMER SUPPLY

2019-07-07 Step Two: Combine the Mash ingredients. Pour the cracked grains into a 30-gallon container and whisk in 25 pounds of sugar until well combined. When the sugar has been completely dissolved, add 15… Reading Time Estimated based on Reviews202 at offgridmaker.com a total of six minutes

CRACKED CORN MOONSHINE RECIPE – HOMESTEADER’S GUIDE.

Fromsimplysurvival.com Time allotted for reading is estimated. a total of six minutes

HOW TO MAKE MOONSHINE MASH – DRINXVILLE

Cracked maize can also be used since it is less expensive and makes filtering easier, but the starches are trapped inside the kernels. You should consider the following if you decide to utilize this sort of corn:… Fromdrinxville.com 7 minutes is the estimated reading time.

GRAND PAPPY’S 4-GRAIN LIQUOR RECIPE – LEARN TO MOONSHINE

In Step 3, you’ll grind and blend (in a blender) for 30 gals of mashed cracked corn, but don’t combine it with the 3-grain yet. I have a 10 gal mash pot to cook the corn, and you’ll mix the 10lbs of blended cracked corn with a 10 pound bag of 3-grain corn. 2018-08-10 Fromlearntomoonshine.com

MOONSHINE RECIPES – HOW TO MAKE MOONSHINE

This moonshine mash recipe will yield five gallons of finished product.

You’ll need five gallons of filtered water, seven pounds of granulated sugar, seven pounds of broken corn, and a tablespoon of yeast to prepare it. This moonshine, on the other hand, is not boiled mash… Fromhowtomakemooonshine.weebly.com

HOW TO MAKE MOONSHINE: A DISTILLERS GUIDE CORN MOONSHINE

There will be five gallons of moonshine from this recipe. In order to prepare it, you’ll need five gallons of filtered water, seven pounds of granulated sugar, seven pounds of crushed corn, and a tablespoon of active dry yeast. Moonshine is different from baked mash… Fromhowtomakemooonshine.weebly.com

GOOD CORN LIQUOR MOONSHINE RECIPE – COUNTRYFARM LIFESTYLES

This moonshine recipe makes a 35-gallon batch of booze. Purchase a bag of corn (cracked corn is preferable), then crush it in a blender. It doesn’t have to be as fine as flour; simply break it up thoroughly. Place it in the “trash bin” of your 35-gallon fermenter. The depth of the corn should be four to five inches. … Fromcountryfarm-lifestyles.com

TIM SMITH’S MOONSHINE RECIPE – YOUTUBE

Tim Smith’s Moonshine Recipe-Base Moonshine is a traditional moonshine recipe. Ingredients and raw materials include: The following ingredients: 5 gallons water4.0 pounds cracked corn4.0 pounds su.

POPCORN SUTTON MOONSHINE RECIPE | WHISKEY STILL COMPANY

Recipe for Popcorn Sutton, posted on August 8, 2012. The Discovery Channel’s “Moonshiners” series broke new ground in the lengthy history of moonshining in the United States of America. The portrayal of persons who manufacture illegal alcohol, sometimes known as “illicit alcoholic beverages,” in the television series helped it gain widespread appeal. Fromwhiskeystill.net

MOONSHINE RECIPES: 12 MUST HAVE MOONSHINE RECIPES – …

Fromcopper-still.net 7 minutes is the estimated reading time.

• It’s time to make the famous Mr. POPCORN SUTTON recipe. In this recipe, you will need 25 pounds coarse ground white corn meal, which will be enough to fill half of your barrel or container. 50 pounds of sugar – 1 pound of sugar per gallon of total volume of water
• WATERMELON-PEACH MOONSHINE BRANDY for five gallons
• 50 pounds of sugar per gallon of total volume of water 1 1/4-pound watermelon (about). There are ten peaches. 1 1/4 cup golden raisins, finely chopped limes (about 15) (juice only) 25 quarts of sugar Recipe for JD’s Black Label. It is made up of 80 percent maize, 12 percent rye, and 8 percent malt, among other ingredients (a high enzyme 6-row variety will be needed). Prepare your ingredients by steeping them in 140-150 degree water for approximately 1 1/2 to 2 hours. BRANDY WITH WATERMELON AND ELDERBERRY FLAVOR. Watermelon weighing 32 lbs. 1 and 1/4 pound dried elderberries 5 gallons of water, 10 lemons (juice and zest), salt, and pepper Recipe for Mountain Dew made using 36 cups of granulated sugar. Making White Lightning begins with the conversion of the grain’s starch into sugar, which is the first stage in the process. WATERMELON-GRAPE MOONSHINE BRANDY is made by placing shelled, whole corn in a container with a hole in the bottom and covering it with warm water. 30 pound of watermelon Grapes (fresh table red or green) weighing 7 1/2 lbs. 5 gallons of water, 10 lemons (juice and zest), salt, and pepper The following ingredients: 24 cups granulated sugar
• INDIAN HEAD CORN MEAL WHISKEY 3 lbs of Indian-Head corn meal are required for this recipe. 1.5 lbs malt, ideally dark, for the dry part (available at most home-brew shops) 1- sachet of 48 turbo yeast
• WELCHES FROZEN GRAPE JUICE MOONSHINE BRANDY
• WELCHES FROZEN GRAPE JUICE BRANDY Welches 100 percent frozen grape concentrate in ten cans (11.5 oz). 7 pound of granulated sugar 5 gallons of water are required. a yeast used in wine or distillation
• BRANDY WITH APPLE PIE. 1 gallon of apple juice should be heated. The temperature should not be higher than 150 degrees. Combine one cup of honey, two teaspoons of cinnamon oil, and two teaspoons of nutmeg in a mixing bowl. Stir until the powder is completely dissolved. The cranberry is in full bloom. 1 cup fresh cranberries (optional). a quarter cup of sugar 3 teaspoons of distilled water 1 bottle (750 mL) moonshine from a liquor store. 2 slices of orange peel (about 2×1 inch)

TRADITIONAL CRACKED CORN MOONSHINE RECIPE – …

2021-05-18· For those looking to capture the original flavor of a traditional shine, we have a fantastic cracked corn moonshine recipe that is sure to please. Modern moonshine may be created from nearly any substance… 3/5 based on howtomoonshine.co (3) The author, Melissa Robertson, is in the category of drinks and cocktails. 2 hours and 14 minutes in total

• Pour six gallons of filtered water into a big saucepan and bring it to a temperature of 165°F. Once the temperature reaches 165°F, remove the pan from the heat and add the cracked corn
• The purpose for grinding the corn is that it must be allowed to release its starch. Once you’ve added your corn, give it a good stir every 5 minutes or so for around 20 seconds. Keep an eye on the temperature. Once the temperature has dropped to 150°F, the crushed barley can be added. Malted barley is a crucial component since it contains enzymes that are required to convert your carbohydrates into sugar. Stir well to ensure that it is well-incorporated
• It is time to turn off the heat once you have added your barley and mixed your mash well. During this stage, we want to get our mash temperature down to room temperature or 70°F
• It is not required to strain your mash at this time. If our mash has cooled, we find it simpler to strain it through a cheesecloth and with clean hands (to squeeze it out) once it has been allowed to chill. Alternatively, you may strain your mash after fermentation by using the same procedure as before.

BASIC MOONSHINE MASH RECIPE – WHISKEY STILL PRO SHOP

Fromwhiskeystillpro.com

• Fromwhiskeystillpro.com

HOW TO MAKE A CORN MASH – HOW TO MAKE MOONSHINE

Fromlearntomoonshine.com

• Don’t grab that beer yet since you’re not quite through yet. Stir for 2- 3 minutes, then once every 5 minutes until the temperature has dipped to 152 degrees. While you’re waiting, you should use this opportunity to start a “Yeast Starter” in your kitchen. With the starter, you will be able to accelerate the fermentation process and produce high-quality corn whiskey that will taste fantastic. The solids should be removed from the Corn Mash once the Mash has cooled to a temperature that can be handled comfortably. In order to aerate the mixture, pour it back and forth between two buckets many times. Alternatively, pour the liquid into a carboy and shake briskly for a minute or two. Check the temperature to ensure that it is between 75 and 85 degrees Fahrenheit. As soon as it is between these two ranges, put your Yeast Starter and corn mash to your primary fermenter pail or carboy, and stir well.

CORN MOONSHINE RECIPE – HOWTOMOONSHINE

Stir for 2- 3 minutes, then stir once every 5 minutes until the temperature has dipped to 152 F. Don’t go for the beer just yet, since you’re not quite through yet! Meanwhile, you should make a “Yeast Starter” to keep you occupied while you wait. With the starter, you will be able to speed up the fermentation process and produce higher-quality corn whiskey with better flavor. The solids should be removed from the Corn Mash once the Mash has cooled to a safe temperature for handling; In order to aerate the mixture, pour it back and forth between two buckets many times.

The temperature should be between 75 and 85 degrees Fahrenheit.

CRACKED CORN MOONSHINE – MICHIGANS GROW HOUSE

Recipe for Cracked Corn Moonshine, published on January 16, 2020. Cracked corn, maize, white sugar, 5 liters filtered water, and 1 package Champagne are all you need to make this dish. 1 can tomato paste (unsalted) 1 teaspoon yeast Instructions: Make it worth your while by making two batches and ensuring that all of your equipment is clean.

Heat your 5 gallons of filtered water in a big saucepan until it reaches 100 degrees Fahrenheit. In a 6 gallon fermenting bucket, combine the following ingredients:… Frommichigansgrowhouse.com Reading Time Estimated at 3 minutes

CRACKED CORN MOONSHINE RECIPES – ALL INFORMATION ABOUT.

Simply Survival has an excellent Cracked Corn Moonshine Recipe that you can find on their website. In the United States, it is permissible to purchase distilling equipment for “legal reasons,” but if you want to utilize our moonshine recipe, you must either obtain a special permit or relocate abroad to a nation with more permissive home brewing regulations. Fromtherecipes.info

HONEY CRACKED CORN MOONSHINE – NORTH GEORGIA STILL CO

Moonshine made with honey cracked corn 5 pounds of broken corn are used in this recipe. 5 pounds of granulated sugar 5 gallons of natural spring water 2 and a half pound of honey 4 1/2 teaspoons dry yeast (2 packets dry yeast or 4 12 teaspoons bulk yeast) Directions: Make a large saucepan or multiple pots of water and bring them all to a boil, or to 180 degrees. 2. Combine the broken corn and sugar in a container large enough to hold all of the water. 3. 3. Pour the 5 gallons of 180 into the container.

MASHING WITH CRACKED CORN – HOME DISTILLER

2014-12-20· After experiencing some difficulties with my mash clearing, I believe I may have roasted some cracked corn on my second run. I have a stainless steel 25-gallon mashing pot that I would want to put to good use. A blanket with insulation will be made for it to assist keep the heat inside. I don’t believe that utilizing flaked maize is a cost-effective option, and I would like to return to using cracked corn instead. I’d want to try my hand at making bourbon. Fromhomedistiller.org

CRACKED CORN FOR MOONSHINE – ALL INFORMATION ABOUT HEALTHY.

a recipe for corn mash a 5 gallon bucket Cracked Corn Moonshine Recipe – HowtoMoonshine tip www.howtomoonshine.co Traditional Cracked Corn Moonshine Recipe For those looking to capture the original flavor of a traditional shine, we have a fantastic cracked corn moonshine recipe that is sure to please. Modern moonshine may be manufactured from nearly anything (even bananas! ), but many moonshiners are interested in learning more about the process of making it. Fromtherecipes.info

MOONSHINE RECIPES | POPULAR MOONSHINE RECIPES | EASY.

30/03/2020 Prepare the yeasts according to the label’s directions. 30/03/2020 Then, bring it down to 77-84.2°F/25-29°C and whisk in the diluted yeasts until everything is well-mixed. 9. Pour the must into a fermentation container and attach an airlock to the bottleneck (optional, but recommended). Frommoonshiners.club

WHISKEY RECIPE – EASY MASH CORN WHISKEY BASE – MOONSHINE.

This is one of the processes that I utilize with practically every moonshine mash recipe since it limits the corn mashing mess to a bare minimum. The most difficult aspect of mash corn is achieving full gelatinization of the starches, which allows them to be broken down into sugars as quickly as possible. As this begins to happen, the entire liquid thickens to the consistency of porridge, making it extremely difficult to stir, although stirring is necessary. Frommoonshinedistiller.com

CRACKED CORN PART 1 – YOUTUBE

This channel is intended to provide insight and context on the science, art, and practice of manufacturing alcohol-based goods at home, as well as information on related topics. Fromyoutube.com

MOONSHINE STILL ALCOHOL RECIPES

Do-It-Yourself Recipes for making moonshine. RECIPE FOR CORNMEAL MASH. So here’s how to make a 5 gallon mash: The following ingredients: 5 gallons of water; 5 pounds of maize meal; 5 pounds of sugar; Turn off the heat and add the corn meal to the water, stirring constantly until it is entirely dissolved.

Repeat the process with the sugar until it is completely dissolved. Once the mash has cooled to the high 70’s, it is time to add the yeast. CORN THAT HAS BEEN CRACKED… Frommoonshinestillplans.com